SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
SC 190-210:Layout 10mm Ränder.qxd - Saruhan Makina ve ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Nach After dem Kapitel<br />
Gebrauch use<br />
GB<br />
Change the micro main<br />
filter<br />
Open the filter chamber as described in the section<br />
“Changing the dust bag”.<br />
a<br />
b<br />
● Remo<strong>ve</strong> the filter cassette MICRO VARIO:<br />
a) first tilt slightly to the front and then<br />
b) lift out<br />
● Lift up the grille [33] of the filter cassette.<br />
● Replace the micro main filter [34] and then press the grille<br />
down again firmly.<br />
34<br />
33<br />
● Put the filter cassette back in and close the filter chamber.<br />
NOTICE!<br />
Change the micro main filter at the latest after 5 dust<br />
bags ha<strong>ve</strong> been used.<br />
Change the HEPA filter<br />
35<br />
Open the filter chamber and remo<strong>ve</strong> the filter cassette MI-<br />
CRO VARIO as described abo<strong>ve</strong>.<br />
● Remo<strong>ve</strong> the old HEPA-filter [35] from the filter cassette<br />
and put in the new one.<br />
● Re-insert the filter cassette MICRO VARIO together with<br />
the HEPA filter and close the filter chamber.<br />
NOTICE!<br />
Change the HEPA filter e<strong>ve</strong>ry 12 - 18 months.<br />
Alternati<strong>ve</strong>ly, you can also use the following filters that are<br />
available as accessories:<br />
Micro Vario Combifilter<br />
(= HEPA + odour filter) Order No. 2414860<br />
Acti<strong>ve</strong> odour filter Order No. 2414840<br />
43
Change language