Descargar el fichero - Telecable

Chapter 3Advanced ConfigurationAdministration > Upgrade FirmwareThe Administration > Upgrade Firmware screen allows youto upgrade the Router’s firmware. Do not upgrade thefirmware unless you are experiencing problems with theRouter or the new firmware has a feature you want to use.Status > RouterThe Status > Router screen displays the Router’s currentstatus.Administration > Upgrade FirmwareBefore upgrading the firmware, download the Router’sfirmware upgrade file from the Linksys website, www.linksys.com. Then extract the file.Upgrade FirmwarePlease select a file to upgrade Click Browse and selectthe extracted firmware upgrade file. Then click Upgradeand follow the on-screen instructions.Administration > Config ManagementThis screen is used to back up or restore the Router’sconfiguration file.Backup ConfigurationAdministration > Config ManagementTo back up the Router’s configuration file, click Backup.Then follow the on-screen instructions.Restore ConfigurationPlease select a file to restore Click Browse and selectthe configuration file. Then click Restore.Router InformationStatus > RouterFirmware Version This is the Router’s current firmware.Current Time This shows the time, as you set on theSetup tab.MAC Address This is the Router’s MAC Address, as seenby your ISP.Router Name This is the specific name for the Router,which you set on the Setup tab.Host Name If required by your ISP, this would have beenentered on the Setup tab.Domain Name If required by your ISP, this would havebeen entered on the Setup tab.InternetConfiguration TypeThis section shows the current network informationstored in the Router. The information varies depending onthe Internet connection type selected on the Setup > BasicSetup screen.Click Refresh to update the on-screen information.Wireless-G Broadband Router21