Toyota Child restraint seat - 73700-0W150 - Child restraint seat - Midi - mode d'emploi

[MIDI_051] To do this, lie the inner padding down,
with its front side on an even surface. You can
then reach into the back through the opening of
the cover. Remove the AIRPADS in the side wings
of the padding, as shown in the illustration.
Step 5
Remove the cover
After removing the inner padding, return the back
plate to its lowest position. Fold out the plastic
compo-nents around the edge of the cover. Now
thread the straps and buckle out of the cover, and
pull the whole cover away from the seat.
Reattaching the covers
To fully reattach all Lexus or Toyota MIDI covers,
please follow the instructions for “Removing the
covers” in reverse.
WARNING!
[MIDI_052] After threading the shoulder
straps back into the back plate, ensure they
run over the two metal bolts.
[MIDI_053] Similarly, check that the straps are
not twisted or tangled in the belt connection
section of the central pull strap on the bottom
of the Lexus or Toyota MIDI.
WARNING!
[MIDI_054] Always ensure that the AIRPADS
are positioned correctly in the inner pockets
of the adjustable inner and that the strap
system is fully functional and properly setup.
Check that the Lexus or Toyota MIDI has
not been damaged. Should you have any
queries on this matter, please contact Lexus
or Toyota dealer. Failure to observe this
notice may seriously risk your child’s safety
in the event of an accident.
! Note: Always check the care instructions on
the cover labels, to see whether or not they are
machine washable. These instructions should take
precedence over any others.
WARNING!
The AIRPADS in the adjustable inner padding
are not washable and must be removed from
the padding before washing.
WARNING!
After every wash, always ensure that the
AIRPADS are positioned correctly in the inner
pockets of the adjustable inner padding.
Failure to observe this notice may seriously
risk your child’s safety in the event of an
accident.
Plastic components can be cleaned with water or
a mild soapy solution. To avoid the build-up of
mold, store the Lexus or Toyota MIDI in a
well-ventilated, dry place.
7. INFORMATION
REGARDING DISPOSAL
Please follow local regulations when disposing of
Lexus or Toyota MIDI packaging and the seat
itself, observing any information stated on the
packaging and seat components regarding the
materials.
Cleaning and care
The covers of your Lexus or Toyota MIDI (the
adjustable inner padding and seat cover) are
removable and washable.
[MIDI_055] The shoulder harnesses of your child
car seat are removable and washable by hand.
The shoulder pads can be cleaned with clear
water.
12 Lexus or Toyota MIDI