HDS 551 C Eco HDS 558 C/CSX Eco HDS 601 C Eco HDS 698 C ...

Clean sieve in water and reinstall.
Clean sieve in the water shortage safe
guard
Figure 7
Loosen covering nut and take off hose.
Figure 8
Take out sieve.
Note
If necessary turn in screw M8 appr. 5 mm inwards
and therewith pull out sieve.
Clean sieve in water.
Push sieve inwards.
Put on hose.
Tighten covering nut firmly.
Clean filter at the detergent suck hose
Figure 9
Take out detergent suck hose.
Clean filter in water and reinstall.
Oil change.
Figure 10
Ready a catch bin for appr. 1 Liter oil.
Kärcher Hint: Use a sliced RM 110 bottle as
a catch gutter.
ready catch gutter.
loosen release screw.
Release oil over the catch gutter into the
catch bin.
Dispose of old oil ecologically or turn in at
a gathering point.
Tighten release screw.
Fill oil slowly up to the MAX marking.
Note
Air pockets must be able to leak out.
For oil type refer to technical specifications.
Faults
Indicator lamp fuel shortage glows
Only HDS 558.../601.../698.../798...
Figure 2 - Pos. 2
– Fuel tank empty
Refill.
Indicator lamp "Ready for use"
turns off
Figure 2 - Pos. 4
– Engine overload/overheat
Turn device switch on "0" and let engine
cool off for min. 5 minutes.
If malfunction still occurs, have device
checked by customer service.
Indicator lamp liquid softener glows
Only HDS 558.../601.../698.../798...
Figure 2 - Pos. 3
– Liquid softener tank is empty, due to
technical reasons a remainder stays in
the tank.
Refill.
– Electrodes in the tank are dirty
Clean the electrodes.
Indicator lamp for detergent glows
Only HDS 558.../601.../698.../798...
Figure 2 - Pos. 5
– Detergent tank is empty.
Refill.
English 33