BA Supertronic 2-3-4 SE Umschlag 1109.cdr - Rothenberger

2 Technical data
Cutting capacity BSPT R 1/4“…2“,
NPT 1/4“…2“,
bolt thread 3/8“…2“
24 ENGLISH
SUPERTRONIC 2 SE SUPERTRONIC 3 SE SUPERTRONIC 4 SE
BSPT R 1/4“…3“,
NPT 1/4“…3“,
bolt thread 3/8“…2“
BSPT R 1/4“…4“,
NPT 1/4“…4“,
bolt thread 3/8“…2“
Speed under no load 40 min-1 (rpm) 33 min-1 (rpm) 22/50 min-1 (rpm)
Motor Single-phase
universal motor
1.150 W, overload
protection
Single-phase
universal motor
1.700 W, overload
protection
Single-phase
universal motor
1.750 W, overload
protection
Protection class: I I I
Degree of protection IP 44 IP 44 IP 44
Frequency: 50/60 Hz 50/60 Hz 50/60 Hz
Weight: (without
accessories)
44 kg 74 kg 105 kg
Dimensions (LxWxH) 535 x 430 x 340 mm 650 x 480 x 420 mm 750 x 540 x 480 mm
Thread-tapping head: Standard tapping Standard tapping Standard tapping
head 1/2“…2“ head 1/2“…2“ und head 1/2“…2“,
Automatic tapping 2“…3“
2“…3“, 3.1/2“…4“
head 1/2“…2“ Automatic tapping Automatic tapping
head 1/2“…2“ und head 1/2“…2“ und 2
2.1/2“…3“
1/2“…4“
Thread jaws: 1/2“…3/4“, 1“…2“ 1/2“…3/4“, 1“…2“, 1/2“…3/4“, 1“…2“,
2.1/2“…3“
2.1/2“…4“
3 Functions of the thread-tapping machine
3.1 Overview A
1 Pipe cutter 11 T-handle
2 Thread-tapping jaws 12 Selector pin (silver)
3 Internal deburrer 13 Selector pin (black)
4 Tool carriage 14 Threaded pin (fast adjustment)
5 Oil drainage screw 15 Profile body
6 Feeder hand wheel 16 Profile pin
7a Overload protection switch
for machines with pedal
17 Locking lever, body
7b On / Off switch for machines 18
without pedal
Locking lever, clamping head
8 Centring chuck 19 Cam plate
9 Clamping chuck 20 Selector block
10 Thread-tapping head