Rev. 004 A BTR 185 - Quick® SpA

GBINSTALLATIONSYSTEM CHECK AND MECHANIC ADJUSTMENTAccording to the most opportune techniques, realise a closing lid of the opening on the hull and fix it to the solid metalplate to tunnel of the retractable unit.Follow the sequence described below to verify the opening of the hatch:1) The BTR propeller should be disconnected from power.2) Take the ring off and remove the pin (fig. 7 / part A), unhook the actuator from the lever (part. B), ensure that thepantograph system is free to open and close without any mechanical obstacle (manually moving the C lever).FIG. 7ABC24RETRACTABLE THRUSTER BTR185 DP - IT GB - REV004A