Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ESC/P Command Reference<br />
ESC M<br />
Apply elite pitch (12 cpi)<br />
ASCII: ESC M<br />
Decimal: 27 77<br />
Hexadecimal: 1B 4D<br />
Parameters<br />
None<br />
Description<br />
• Prints the subsequent text with the elite pitch (12 characters/inch).<br />
• The character spacing is 16 dots (=203 dots/12 characters).<br />
• If the character width is 16 dots or less, the character spacing is specified as 16 minus the character width.<br />
• If the character width exceeds 16 dots, the character spacing is specified as the character width.<br />
(The spacing between characters is 0 dot.)<br />
In this case, the pitch does not exactly equal the elite pitch.<br />
• With double-width characters, the character spacing is doubled (32 dots).<br />
• With half-width characters, the character spacing is halved (8 dots).<br />
• When the character spacing is changed with ESC SP, the setting is updated.<br />
• This command is invalid when proportional pitch is selected.<br />
• In outline fonts, the spacing between characters is 0 dot.<br />
Example<br />
For a 15-dot font at full width:<br />
Full width<br />
15 dots<br />
Double width<br />
30 dots<br />
A B<br />
A B<br />
1 dot<br />
2 dots<br />
- 29 -<br />
5. Control Command Details