Brother RJ-4030 - Comandi ESCP

ESC/P Command Reference
ESC $
Specify absolute horizontal position
ASCII: ESC $ n1 n2
Decimal: 27 36 n1 n2
Hexadecimal: 1B 24 n1 n2
Parameters
0≤n1≤255, 0≤n2≤255
Description
• Specifies the absolute print position (in dots) for the next data.
• An absolute print position specifies the next print position as a number of dots from the left margin.
• n1 and n2 indicate the number of dots from the left margin.
(Number of dots=n1+n2*256)
• The dot spacing is calculated as 1/203 inch.
• The maximum number of dots that can be specified with n1 and n2 depends on the media.
• This command is available only with left alignment.
ESC \
Specify relative horizontal position
ASCII: ESC \ n1 n2
Decimal: 27 92 n1 n2
Hexadecimal: 1B 5C n1 n2
Parameters
0≤n1≤255, 0≤n2≤255
Description
• Specifies the horizontal print position (in dots) as a relative position from the current position.
• A relative position specifies the next print position as a number of dots from the current position.
• n1 and n2 indicate the number of dots from the current position. (Number of dots=n1+n2*256)
• The dot spacing is calculated as 1/203 inch.
• Left margin position≤horizontal position after moving