Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ESC/P Command Reference<br />
ESC X<br />
Specify character size<br />
ASCII: ESC X m nL nH<br />
Decimal: 27 88 m nL nH<br />
Hexadecimal: 1B 58 m nL nH<br />
Parameters<br />
Character width: The value of m is irrelevant.<br />
Character size:<br />
<br />
Valid only with:<br />
nL=16, 24, 32 dots<br />
nH=0<br />
<br />
The maximum is:<br />
nL=144<br />
nH=1<br />
Description<br />
• This command is used only to change the size.<br />
• Outline must not be specified.<br />
• The character width cannot be specified.<br />
• The character size is specified as n=nL+nH*256 dots.<br />
• With bitmap fonts, only n=16, 24 and 32 are valid.<br />
• With outline fonts, n=400 is the maximum.<br />
• The commands for specifying stretched characters, compressed characters and the character spacing<br />
(SO, ESC W, ESC !, ESC SP) remain available.<br />
Example<br />
For “ABC” at a 24-dot size and “DEF” at a 48-dot size:<br />
Code: ESC k 01h<br />
ESC X 00h 18h 00h ABC<br />
ESC k 09h<br />
ESC X 00h 30h 00h DEF FF<br />
Print result: ABCDEF<br />
- 37 -<br />
5. Control Command Details