Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
Brother RJ-4030 - Comandi ESCP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ESC/P Command Reference<br />
ESC D<br />
Specify horizontal tab position<br />
ASCII: ESC D [n] k NUL<br />
Decimal: 27 68 [n] k 0<br />
Hexadecimal: 1B 44 [n] k 00h<br />
Parameters<br />
1≤n≤255, 0≤k≤32<br />
Description<br />
• The horizontal tab position is the character width (when the command was specified)*n from the left<br />
margin.<br />
• Enter n values in ascending order and end the settings with NUL.<br />
• If an n value is smaller than a previous one, tab setting is ended.<br />
• Even if the character width is changed after the horizontal tab positions have been specified, the horizontal<br />
tab position settings do not change.<br />
• ESC D NUL cancels all horizontal tab positions.<br />
• If the left margin is moved, the horizontal tab positions are also moved by the same amount.<br />
• Up to 32 horizontal tab positions can be specified. However, horizontal tab positions beyond the right<br />
margin are invalid and only become valid when a change in the right margin setting or left margin setting<br />
moves the print area to include those tab positions.<br />
• The character width when the horizontal tabs are specified includes the settings for the character spacing,<br />
full-width character spacing or half-width character spacing. In addition, when a pitch of 10 cpi, or 12 cpi,<br />
compressed characters or double-width characters are specified, that character width is considered as the<br />
unit.<br />
• When proportional pitch is specified with ESC p, horizontal tab positions are specified at 10 cpi.<br />
• When the printer is turned on, a horizontal tab position is specified every 8 columns at 10 cpi.<br />
Even if the character width is changed before the horizontal tab positions has been specified, the<br />
horizontal tab positions do not change.<br />
Left edge Left margin position Tab position<br />
Tab position Right margin position<br />
・<br />
Column<br />
・<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16<br />
1 2 3 4 5 6 7 8 9 10 11 12 13 14<br />
HT code<br />
HT code<br />
・<br />
Unprinted area<br />
Printable area<br />
Unprinted area<br />
Example:<br />
After the left margin is specified as Column 3 and the right margin as Column 15,<br />
horizontal tabs were specified at Column 5 and Column 10, and HT were performed.<br />
- 44 -<br />
5. Control Command Details