AD224 - RS 100 R - Oertli
AD224 - RS 100 R - Oertli
AD224 - RS 100 R - Oertli
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.2 Fixing to the wall<br />
<br />
5 "Installer" settings<br />
5.1 Room sensor calibration<br />
- Measure the room temperature with a thermometer.<br />
- Press key and simultaneously for 5 seconds.<br />
5.2 Clock calibration<br />
20/04/09 - 300010273-001-B<br />
- Using + and -, set the correction in such a way as to make the<br />
display coincide with the thermometer measurement.<br />
- Press key and simultaneously for 5 seconds. - Using + and - set the clock correction, which is expressed in<br />
minutes per month (example: if the time gains 3 minutes every 2<br />
months, set -1.5).<br />
5.3 Total reset<br />
<br />
<br />
The boiler must be switched on to perform a total reset (reinitialization<br />
of all parameters).<br />
To do so: press simultaneously on the 3 keys + MODE) +<br />
.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
27