Invacare®ScanBed 755TM

6. Disassembly/assembly of the SB755 TM
Disassembly
1. Make sure that the castors have the brakes on.
2. Adjust the bed to a suitable height.
3. Dismount all accessories.
4. Run the bed to the marked height level, so that
the cams on the base frame’s guide way and the shear
arms are opposite each other.
5. Disconnect the plug from the mains.
6. Remove the locking cam from the control unit.
7. Disconnect the plugs of backrest-, thigh- and leg motors and ensure that
the cables are not caught in the base.
8. Lift up the seat section.
There is risk of entrapment or squeezing during assembly and dismounting
of the bed.
9. Pull out the head section to stop,
and tip it down onto the floor
UM_1518190_GB_DK_SE_NO_FI_DE_NL_FR_IT_PT_ver06.indd 24 2011-11-08 15:24:16
8.
9.
24
4.
9.