1 2 - Bygghemma

How to operate the extractor hood The most effective method of removingvapours produced during cooking is to:❑ Switch the ventilator ONas soon as you begin cooking.❑ Switch the ventilator OFFa few minutes after you have finishedcooking.Switching the ventilator ON:1. Pull out the vapour extractor tray.❑ The ventilator is operating.2. Select the required ventilator power level.Operating controls on different models:21Level 1Level 2Light:0 OFFONNote: The light can be switched on at anytime, including when the vapour extractortray has been pushed back into the hood.2Level 12Level 2If you encounter a problem23123Level 3Level 3Level 1Level 2Switching the ventilator OFF:❑ Push the vapour extractor tray back inas far as it will go.Note: The next time that the tray is pulledout, the ventilator will start up at the powerlevel to which it was last set.If you have any questions or if a faultoccurs, please call Customer Service.(See list of Customer Servicerepresentatives).When you call, please quote the following:E-Nr.FDEnter the relevant numbers into the boxabove. The E-Nr. (product no.) and FD(production date) are shown on thenameplate which can be seen inside theextractor hood after the filter frame hasbeen detached.5