Pita King (DE, EN, TR) - Beem

EN
36
Commissioning
Electrical connection
For safe and trouble-free operation of the appliance, the following
instructions have to be observed for the electrical connection:
■ Before connecting the appliance, check the connection data
(voltage and frequency) on the rating plate with those of your
mains power supply. This data must correspond in order to
avoid damage to the appliance. If in any doubt, ask your electrical
appliance dealer.
■ The appliance may be connected to the mains power supply
by an unwound extension lead not more than 3 metres long
and with a cross-section of 1.5 mm². The use of multiway
adapters or multiple socket outlets is forbidden due to the associated
fire hazard.
■ Ensure that the connecting lead is undamaged and is not laid
over hot surfaces or sharp edges.
■
The connecting lead must not be strained or kinked.
■ Lay the connecting lead in such a way that it does not pose a
tripping hazard.
The
■ electrical safety of the appliance is only assured when
it is connected to a properly installed protective earth (PE)
conductor system. Connection to a plug socket without PE
conductor is forbidden. If in doubt, have the house installation
checked by a qualified electrician. The manufacturer assumes
no liability for injury or damage caused by a missing or
interrupted protective earth conductor.
BEEM - Elements of Lifestyle