Quick Guide Kurzanleitung - Danfoss

Weitere Magazine

Empfehlungen

Info

1. Important Instructions 1. Important Instructions 1 1.1. About this Quick Guide This manual contains detailed product information and instructions for using the Danfoss CLX GM equipment. This document relates to the current version at the time of printing. Danfoss reserves the right to make changes due to the introduction of new functions and improvements. The names of products and companies mentioned in this document may be registered trademarks of their respective owners. This Quick Guide contains information about: • Safety • Product overview, system requirements • Technical descriptions • Installation, grid management, and inverter connection • Getting started • Technical data 1.2. Symbols This manual contains important information accompanied by the following symbols: The Attention symbol draws attention to a risk of damage to components or danger to persons if the information provided is not observed. This type of information must be observed at all times. Note: The Note symbol marks supplementary information for improving operating processes as well as user tips. 1.3. Safety Instructions The reader must be familiar with the rules and regulations for electrical equipment and connection to the mains power network. Pay particular attention to general safety regulations for working with electrical systems. Observe the safety instructions below to prevent injury to persons and damage to connected equipment. Contact with electrically conductive parts after disconnection from the mains supply can be dangerous. Do not connect the equipment to the mains supply before installation. L00410637-01_5b 3
1. Important Instructions 1 Equipment must be installed only in protected/dry environments. Do not use metallic/pointed/sharp instruments to access the enclosure. Prevent cables and terminals from being exposed. The power plug must be accessible at all times. Qualified personnel only must perform service. Equipment must only be operated at the rated supply voltages (12–24 VDC, correct polarity). A suitable power supply unit is included in the scope of delivery. Note: Observe the manufacturer's instructions regarding the handling of power supply units (especially switching units). Observe the manufacturer's instructions regarding the handling of inverters. 4 L00410637-01_5b
Seite 1 und 2: MAKING MODERN LIVING POSSIBLE Danfo
Seite 3: Contents Contents 1. Important Inst
Seite 7 und 8: 2. Product Overview 2.2.2. System R
Seite 9 und 10: 3. Technical Description 3.2. Displ
Seite 11 und 12: 4. Installation Like all electronic
Seite 13 und 14: 5. Configuration Note: It is critic
Seite 15 und 16: 5. Configuration 5 Illustration 5.2
Seite 17 und 18: 5. Configuration Note: To select an
Seite 19 und 20: 6. Technical Data 6. Technical Data
Seite 21 und 22: 1. Wichtige Anweisungen 1 1. Wichti
Seite 23 und 24: 2. Produktübersicht 2. Produktübe
Seite 25 und 26: 3. Technische Beschreibung 3. Techn
Seite 27 und 28: 4. Installation 4. Installation 4.1
Seite 29 und 30: 5. Konfiguration 5. Konfiguration 5
Seite 31 und 32: 5. Konfiguration Das Verhalten der
Seite 33 und 34: 5. Konfiguration 5.3.1. Konfigurier
Seite 35 und 36: 5. Konfiguration 5.3.2. Konfigurier
Seite 37 und 38: 6. Technische Daten 6. Technische D

Quick Guide Kurzanleitung - Danfoss

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?