Quick Guide Kurzanleitung - Danfoss

Weitere Magazine

Empfehlungen

Info

2. Product Overview 2. Product Overview 2.1. Product Description 2 Grid management of PV plants with TLX Pro or TLX Pro+ inverters is handled by the CLX GM and the master functionality of the TLX Pro and TLX Pro+ inverters. The CLX GM is connected directly to the output of a radio ripple control receiver. The receiver has 4 digital outputs K1-K4, which are used by the grid operators for signalling either power reduction or reactive power setpoint commands. The CLX GM reads the current relay state and via its Ethernet connection to the inverter network it broadcasts a message to the master inverter. Therefore all configuration of how to react upon a certain relay state is performed directly in the master inverter itself. The CLX GM is connected to the receiver and the inverter network and requires no additional configuration. Illustration 2.1: Grid Management for Solar Power Plant Legend 1 Radio ripple control receiver 2 CLX GM 3 Master inverter 4 Follower inverters The equipment is supplied with the following items: 1 CLX GM 2 Mounting bracket with screws 3 Accessories (power supply, network cable standard RJ-45 TP10/100 cat 5e) 4 Packaging 5 Instructions Table 2.1: Product Overview 2.2. System Requirements 2.2.1. Intended Use The CLX GM is intended solely for use with TLX Pro and TLX Pro+ inverters. Drilling holes in the equipment or mechanical modifications will damage the equipment and invalidate the warranty. L00410637-01_5b 5
2. Product Overview 2.2.2. System Requirements 2 The CLX GM has a built-in web interface, for display of simple status information and configuration. The following web browsers are recommended: Internet Explorer ® Version 6 or later Firefox ® Version 2 or later Note: The grid management behaviour is configured directly via the web interface of the TLX Pro or TLX Pro+ master inverter. For configuration, a PC and a crossed network cable are therefore needed and must be available at commissioning. 6 L00410637-01_5b
Seite 1 und 2: MAKING MODERN LIVING POSSIBLE Danfo
Seite 3 und 4: Contents Contents 1. Important Inst
Seite 5: 1. Important Instructions 1 Equipme
Seite 9 und 10: 3. Technical Description 3.2. Displ
Seite 11 und 12: 4. Installation Like all electronic
Seite 13 und 14: 5. Configuration Note: It is critic
Seite 15 und 16: 5. Configuration 5 Illustration 5.2
Seite 17 und 18: 5. Configuration Note: To select an
Seite 19 und 20: 6. Technical Data 6. Technical Data
Seite 21 und 22: 1. Wichtige Anweisungen 1 1. Wichti
Seite 23 und 24: 2. Produktübersicht 2. Produktübe
Seite 25 und 26: 3. Technische Beschreibung 3. Techn
Seite 27 und 28: 4. Installation 4. Installation 4.1
Seite 29 und 30: 5. Konfiguration 5. Konfiguration 5
Seite 31 und 32: 5. Konfiguration Das Verhalten der
Seite 33 und 34: 5. Konfiguration 5.3.1. Konfigurier
Seite 35 und 36: 5. Konfiguration 5.3.2. Konfigurier
Seite 37 und 38: 6. Technische Daten 6. Technische D

Quick Guide Kurzanleitung - Danfoss

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?