Design Fleischwolf Pro M - Onyougo.
Design Fleischwolf Pro M - Onyougo.
Design Fleischwolf Pro M - Onyougo.
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
7. Bake the cookies according to your recipe.<br />
Solving <strong>Pro</strong>blems<br />
If any problems occur during operation, you will find solutions in the following table. Additionally,<br />
you can contact your vendor.<br />
<strong>Pro</strong>blem Possible Cause Solution<br />
The motor does not work, The appliance is not live. Insert the power plug in the<br />
the indicators are dark.<br />
power outlet.<br />
The motor does not<br />
work, the indicators are<br />
illuminated.<br />
The reverse operation<br />
does not work. The<br />
REVERSE button flashes<br />
blue.<br />
The reverse operation<br />
does not work. The ON/<br />
OFF button is illuminated<br />
blue.<br />
The power switch is switched<br />
OFF.<br />
The circuit breaker activates.<br />
The overheat protection switched<br />
off the appliance.<br />
The cutter housing is blocked.<br />
The reverse operation starts<br />
after a time delay of 4<br />
seconds.<br />
The cutter housing is blocked.<br />
The overheat protection switched<br />
off the appliance.<br />
Malfunction of the motor.<br />
You cannot start reverse operation,<br />
while forward operation<br />
is switched on.<br />
39<br />
Switch on the power switch.<br />
Press the red button at the<br />
bottom of the appliance.<br />
Let the motor cool down (See:<br />
Overheat <strong>Pro</strong>tection).<br />
Switch to reverse operation<br />
for a moment (See: To Loosen<br />
Blocked Food)<br />
Wait until the motor starts<br />
automatically.<br />
Switch OFF the appliance<br />
completely and unplug. Then<br />
disassemble the appliance<br />
to remove the obstacle (See:<br />
Disassembling the Appliance).<br />
Let the motor cool down (See:<br />
Overheat <strong>Pro</strong>tection).<br />
Contact an authorized service<br />
centre for repair.<br />
Switch off the ON/OFF<br />
button. This button must be<br />
illuminated white to activate<br />
reverse operation. Try again.