High quality reliable tools. X-POWER - KINZO
High quality reliable tools. X-POWER - KINZO
High quality reliable tools. X-POWER - KINZO
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
8 OPERATION<br />
8.1 Switching ON and OFF<br />
• Connect the plug to the power supply.<br />
• Pull the switch trigger (5). Press the lock off button (6) to keep the saw running without touching the trigger.<br />
• When you release the switch trigger, the saw turns off .<br />
8.2 Speed adjustment<br />
This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is<br />
controlled by the amount of switch trigger depression.<br />
8.3 Pivot shoe adjustment<br />
The pivot shoe of your reciprocating saw pivots up and down in both directions. The pivot shoe is also<br />
adjustable, allowing the use of the blade teeth at diff erent positions on the blade.<br />
To change position of the pivot shoe assembly:<br />
Pivot shoe<br />
assembly<br />
Hex. Key<br />
• Unplug your saw.<br />
Cap screw<br />
WARNING: Failure to unplug your saw could result in accidental starting causing serious<br />
injury.<br />
• Loosen the both cap screws in the gear frame with hex.key<br />
• Reposition pivot shoe assembly in or out.<br />
• Retighten both cap screws securely. Do not over tighten cap screws.<br />
• Remove hex key.<br />
Cutting into electrical wiring in walls can cause blade, blade clamp, and saw bar assembly to<br />
become electrically live. Do not touch metal parts when cutting into a wall; grasp only the<br />
insulated gripping surfaces provided by the tool. Make sure hidden electrical wiring, water<br />
pipes, and mechanical hazards are not in the blade path when cutting into a wall.<br />
71799 manual.indd 5 13-01-11 12:59<br />
A<br />
5
Change language