1/15-1

Dotazione di serie:
Scatola ingranaggi con ruota libera.
Attacco a tre punti.
Coltelli a scelta.
Cofano posteriore apribile (solo per manutenzione).
Controcoltello a denti fisso (RMU 280, RMU 280 S).
Controcoltello a denti regolabile
(RMU 2550, modelli RMU 2900 e 3200).
Tendicinghie automatico
(escluso RMU 280, RMU 280 S e RMU 3200 F).
Due ruote sterzanti a 180° tipo 10.0/80
(escluso RMU 280, RMU 280 S e RMU 3200 F).
Due ruote sterzanti a 180° tipo 8.00-R15 (solo RMU 3200 F).
Standard equipment:
Gearbox with free-wheel.
Three-point-hitch.
Knives on choice.
Openable rear bonnet (only for maintenance).
Fixed counterknife with teeth (RMU 280, 280 S).
Adjustable counterknife with teeth
(RMU 2550, models RMU 2900 and 3200).
Automatic belt tighteners
(excluded RMU 280, RMU 280 S and RMU 3200 F).
Two 180° steering wheels type 10.0/80
(excluded RMU 280, RMU 280 S and RMU 3200 F).
Two 180° steering wheels type 8.00-R15 (only RMU 3200 F).
Serienzubehör:
Getriebe mit Freilauf.
Drei-Punkt-Anbau.
Messer nach Wunsch.
Heckhaube (darf nur für Wartungsarbeiten
geöffnet werden).
Fixe gezahnte Gegenleiste (RMU 280, 280 S).
Einstellbare gezahnte Gegenleiste
(RMU 2550, Modelle RMU 2900 und 3200).
Automatischen Riemenspanner
(Außer RMU 280, RMU 280 S und RMU 3200 F).
Zwei 180° Schwenkräder typ 10.0/80
(Außer RMU 280, RMU 280 S und RMU 3200 F).
Zwei 180° Schwenkräder typ 8.00-R15
(nur RMU 3200 F).
Mod.
Scatola ingranaggi - Gearbox
Getriebe
540
giri/min - rpm - U/min
1000
giri/min - rpm - U/min
RMU 2550 66 kW (90 CV-HP-PS) 110 kW (149 CV-HP-PS) 6.900
RMU 280 66 kW (90 CV-HP-PS) 110 kW (149 CV-HP-PS) 4.990
RMU 280 S 88 kW (120 CV-HP-PS) 129 kW (175 CV-HP-PS) 5.870
RMU 2900 81 kW (110 CV-HP-PS) 110 kW (149 CV-HP-PS) 7.280
RMU 2900 S 88 kW (120 CV-HP-PS) 129 kW (175 CV-HP-PS) 7.900
RMU 2900 SF — 187 kW (254 CV-HP-PS) 9.590
RMU 2900 DT S — 187 kW (254 CV-HP-PS) 10.800
RMU 3200 F 81 kW (110 CV-HP-PS) 110 kW (149 CV-HP-PS) 7.650
RMU 3200 88 kW (120 CV-HP-PS) 129 kW (175 CV-HP-PS) 8.170
RMU 3200 DT S — 187 kW (254 CV-HP-PS) 10.930
RMU 3200 DT S-96C — 187 kW (254 CV-HP-PS) 11.300
€
NOTA: per i modelli a 540÷1000 giri/min specificare numero di giri della presa di forza.
NOTE: for the models with 540÷1000 rpm it is necessary to specify the PTO rounds per minute.
BEMERKUNG: für die Modelle mit 540÷1000 U/min, spezifizieren Sie die Drehzahl der Zapfwelle.
Accessori a richiesta - Accessories on request - Zubehör auf Wunsch
RMU
2550
RMU
280
RMU
280 S
RMU
2900
RMU 2900
S-SF-DT S
RMU
3200 F
RMU 3200
DT S-DT S/96 C
Slitte - Skids - Kufen 270 — — 270
Ruote sterzanti a 180° - 180° steering wheels
180° Schwenkräder
— 950 — — — —
Ruote pivottanti - Pivot wheels - Pivoträder 1.680
Rullo posteriore ø194 - Rear roller ø194 - Heckwalze ø194 — 490 — — — —
Rullo posteriore ø273 - Rear roller ø273 - Heckwalze ø273 — 750 — — — —
Rullo posteriore ø323 - Rear roller ø323 - Heckwalze ø323 950 — — 1.040
Spostamento manuale (maggiorazione) - Manual displacement (extra charge)
Manuelle Verstellung (Aufpreis)
— 840 — — — — —
Spostamento idraulico (maggiorazione) - Hydraulic displacement (extra charge)
Hydraulische Verstellung (Aufpreis)
Controcoltello a pettine solo per coltelli a “Y” (maggiorazione)
Comb shaped counterknife only for “Y” knives (extra charge)
Kamm-Gegenleiste nur für “Y” Messer (Aufpreis)
Ruote supplementari (la coppia) - Supplementary wheels (the pair)
Zusatz Räder (das Paar)
— 1.010 — — — — —
110 — — 176 — 176
1.010 — — 1.010
Carrello di trasporto - Transporting trolley - Transportanhänger 2.100 — — 2.100
Montaggio anteriore - Front mount - Frontanbau 900 — — 900
Cardano tipo 8 L=1100 - Type 8 cardan joint L=1100 - Typ 8 Gelenkwelle L=1100 270 — 270 — 270 —
Cardano tipo 8 L=1100 1”3/4 Z6 - 1”3/8 Z6
Type 8 cardan joint L=1100 1”3/4 Z6 - 1”3/8 Z6
Typ 8 Gelenkwelle L=1100 1”3/4 Z6 - 1”3/8 Z6
— — 286 — 286 — 286
62