MANUAL - TermaTech

FUNCTION / SETTINGSConstant operationThe Celsius is also fitted with a function for constantoperation. This means that the fan runs continuouslyat a specific, desired speed.The yellow indicator lamp does not light up duringconstant operation. When the thermostat is thenactivated, the fan shifts to the preset speed for theheat transfer function.ENActivation of constant operation• Pull the power switch mechanism once – the yellowindicator lamp flashes.• Set the desired speed using the plus and minuskeys (SPEED).• Pull the power switch mechanism – yellow indicatorlamp stops flashing.• The fan now runs constantly even when the fan'sthermostat function is not activated.Switching off constant operation• Pull the power switch mechanism once – the yellowindicator lamp flashes.• Press the minus key (SPEED) until no green LEDlamps are lit - the fan stops.• Pull the power switch mechanism – yellow indicatorlamp stops flashing.This means that the fan can operate at two individualspeeds at constant operation or thermostatoperation if desired.Pause functionThe pause function means that the fan stops (whichevermode it is in) and remains inactive for one hour.The pause function is activated by pulling the powercord; after one hour it resumes its thermostat function.During this time the yellow LED flashes. If youchange your mind, you can deactivate the pause bypulling the cord once more.11