MANUAL - TermaTech

CELSIUS DESCRIPTIONLED indicator – What is the fan doing?As a user it is beneficial if you can visually see whatthe fan is doing and which mode is currently active.ENThe fan uses a yellow LED lamp to indicate heattransfer - the thermostat is switched on.The yellow LED lamp also has three different flashingspeeds.• Slowly - Calibrating the thermostat• Medium – The pause function is activated• Fast – adjustment of the difference between thecut-in and cut-off temperature (hysteresis).If the constant operation function is used, however,no lamp lights up.Extremely quietThe design of the low voltage motor in the Celsiusmeans that the fan works quietly. Those of you whopreviously had a heat transporter with a conventionalAC motor will hardly notice that your Celsiusis running when it is installed and operational. Testsshow that today the Fresh Celsius is the quietestheat transporter on the market.Integrated safety switchIn principle, no fan on the market today has an integratedsafety switch. European electrical safetystandards require any permanent electrical apparatusinstalled to be preceded by an omnipolar switch.This means that you must install a separate switchon the wall before the cable reaches the fan.The Fresh Celsius has an integral omnipolar switchwhich means you do not need to install a separateswitch. Very cost efficient for you the consumer andit also guarantees time saving during installation –very smart.15