INSTRUCTION BOOKLET Griddle & Grill - Lakeland

Preheating the griddle empty before use.Once you have familiarised yourself with your griddle it is advisable to prepare the griddle and heatthe griddle up empty for the very first use. This is because it is common for the griddle to producesome smoke on its first use which then disappears with future use.To do this;1. Open the griddle up by pulling the handle upwards. Remove and then wash the grill plates anddrip tray thoroughly in hot soapy water, either by hand or on the top rack of the dishwasher.2. Ensure grill plates and drip tray are totally dry before refitting to the griddle.3. Wipe over the outside of the griddle using a soft dry and clean cloth.4. Close the griddle shut and turn it on by plugging it into a mains socket. You will then hearthe griddle beep once and see the LCD screen flash blue once, both of which indicate that thegriddle is plugged in. Then the LCD screen will go out.5. Press the upper grill plate and lower grill plate power buttons on (see control panel diagram)and the LCD screen will light up blue and automatically flash 150, which is the default heatsetting.6. Adjust the heat levels on both the upper and lower grill plates to 220 and leave the griddle topreheat, during which time the number 220 will flash constantly on either side to indicate itis preheating.7. NOTE: During the initial use of this griddle it may produce some smoke which is perfectlynormal. There is nothing to worry about and this will disappear with future use.8. Leave the griddle to preheat for approximately 3- 4 minutes and once it has reached 220 theLCD screen will beep and the number 220 will stop flashing and remain fixed on the screenfor both upper and lower grill plates. Your preheating of the griddle empty is now complete.9. Press the upper and lower grill plate power buttons off and unplug the griddle from themains socket and leave to cool completely before using.You are now ready to use your griddle.10