Katalog TOOLS PLUS IDEAS - Komet Group
Katalog TOOLS PLUS IDEAS - Komet Group
Katalog TOOLS PLUS IDEAS - Komet Group
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
10<br />
KOMET KUB® Drillmax XL<br />
Hochleistungsbohrer<br />
für tiefe Bohrungen<br />
Bei den neuen KOMET KUB® Drillmax XL ist<br />
das Know-how aus vielen Sonderlösungen in<br />
ein Standard-Werkzeugprogramm eingeflossen,<br />
das für 20×D in den Durchmessern von 3,0 bis<br />
10,0 Millimeter und für 30×D in den Durchmessern<br />
3,0 bis 8,0 Millimeter ab Lager verfügbar ist.<br />
Die spiralgenuteten Tieflochbohrer sind mit vier<br />
Führungsfasen versehen.<br />
Ausführung:<br />
- 4 Führungsfasen<br />
- Bohrerdurchmesser:<br />
für 20×D: 3,00 – 10,0 mm<br />
für 30×D: 3,00 – 8,00 mm<br />
- Schaftform: DIN 6535 HA<br />
- Beschichtung: TiAlN<br />
- Spitzenwinkel: 140°<br />
- Spiralwinkel: 30°<br />
- Innere Kühlschmierstoffzufuhr<br />
Hinweis:<br />
Pilotbohrung erforderlich, Tiefe 2 – 3×D<br />
Es können KOMET KUB® Drillmax 5×D<br />
Standardbohrer mit demselben Durchmesser<br />
verwendet werden.<br />
Ihr <strong>PLUS</strong>:<br />
4 Fasen für hohe Bohrungs- und Fluchtungsgenauigkeit<br />
Ideale Spanabfuhr durch optimierte, spezielle<br />
Spannuten<br />
Prozesssicheres Bohren bis zu 30×D ohne Lüften<br />
Deutlich verkürzte Fertigungszeiten durch<br />
höchste Vorschübe und Schnittgeschwindigkeiten<br />
High-Performance Drill<br />
for Deep Holes<br />
With the new KOMET KUB® Drillmax XL, the<br />
expertise gained from developing many special<br />
solutions has been transferred to a standard tool<br />
range, which is available from stock for 20×D in<br />
diameters of 3.0 to 10.0 mm and for 30×D in<br />
diameters of 3.0 to 8.0 mm.<br />
The spiral-fluted deep-hole drills have four guide<br />
chamfers, ensuring good guidance.<br />
Variant:<br />
- 4 x guide chamfers<br />
- Drill diameter:<br />
for 20×D: 3,00 – 10,0 mm<br />
for 30×D: 3,00 – 8,00 mm<br />
- Shank: DIN 6535 HA<br />
- Coating: TiAlN<br />
- Point angle: 140°<br />
- Helix angle: 30°<br />
- Internal coolant supply<br />
Note:<br />
Pilot hole required, depth: 2 – 3×D<br />
KOMET KUB® Drillmax 5×D standard drills<br />
with the same diameter can be used.<br />
BENEFITS for you:<br />
4 x chamfers for high drilling and alignment<br />
precision<br />
Ideal chip removal thanks to optimised,<br />
special flutes<br />
Reliable drilling up to 30×D, with no pecking<br />
Significantly reduced production times due to<br />
extremely high feed rates and cutting speeds