Montageanleitung - Hansgrohe

Erecting shower tray
6
8
1
4
2
6
9
3
5
7
10 11
6
Check for transport damage before fitting!
Look out for any pipes or electric cables (underfloor heating).
Mounting shower tray feet
Pre-mounting shower tray feet (3) and adjust it to required shower
tray height. Fixing bolt (2) with shower tray. If the optional
plinth is used secure its magnet holder (9) on the shower tray.
Adjust height of shower tray (approx. 180 mm) to plinth.
Assembling waste
Fix waste (5) in accordance with the additional assembling
instructions.
Fix bent outlet (4) and position it. Turn shower tray feet to get
the required height. The minimum height between the waste
and floor should be 2 mm.
Fixing and positioning shower tray
Position shower tray and align horizontally.
Check with spirit level the horizontal level of the shower tray.
Fix shower tray feet. Mark fitting points (6,7) to wall and floor.
Remove shower tray. Drill holes at fixing points on wall (6)
Ø10 and floor (7) Ø8, insert dowels.
Check position and level of the shower tray! Fix the shower
tray with bolt (1) and sound insulation hollow pipe in the
corner. Secure shower tray to the wall with hexagonal wood
screw (8) 8x60 with slide disc and washer. Secure shower
tray to the floor with fixing plate (11) and hexagonal wood
screw (10) 6x50.
Connect waste pipe and check for leaks ! Attach the
missing tiles and seal shower tray.
Do not brick in the shower tray until the
Shower Temple is completely assembled.
If a plinth will be used the bricking in of the
shower tray is not required.
39
English