G UIDE - CAD Schroer

More documents

Recommendations

Info

All rights reserved. No part of this documentation may be reproduced in any manner (print, photocopy or other) without the written permission of CAD Schroer GmbH. CAD Schroer GmbH has made its best effort to ensure that the information in this document is accurate and reliable, but cannot guarantee the accuracy, timeliness, reliability or completeness of any of the information contained herein. CAD Schroer GmbH will not make any warranty nor accept legal responsibility or liability of any kind for consequences resulting from errors or omissions. Registered Trademarks of CAD Schroer GmbH: MEDUSA, STHENO Trademarks of CAD Schroer GmbH: MEDUSA 4 , STHENO/PRO, MEDEA, MPDS Third-Party Products and Trademarks: Pro/ENGINEER, Pro/DETAIL and Pro/TOOLKIT are registered trademarks of Parametric Technology Corporation. All other brand or product names are trademarks or registered trademarks of their respective owners. July 2010 Copyright © CAD Schroer GmbH Fritz-Peters-Str. 26 - 30 D - 47447 Moers Germany CAD Schroer GmbH Fritz-Peters-Str. 26-30 47447 Moers Tel. +49 2841 91 84 - 0 Fax +49 2841 91 84 - 44 e-mail: info@cad-schroer.de www.cad-schroer.de Switzerland CAD Schroer AG Bettlistr. 35 8600 Dübendorf Tel. +41 44 802 89 - 80 Fax +41 44 802 89 - 88 e-mail: info@cad-schroer.ch www.cad-schroer.ch France CAD Schroer France SAS 17, Rue du Docteur Lebel 94300 Vincennes Tel. +33 1 41 94 51 40 Fax +33 1 43 77 17 68 e-mail: info@cad-schroer.fr www.cad-schroer.fr United Kingdom CAD Schroer UK Ltd 39 Newnham Road Cambridge CB3 9EY Tel. +44 1223 460 408 Fax +44 1223 460 409 e-mail: info@cad-schroer.co.uk www.cad-schroer.co.uk 2 © CAD Schroer GmbH Italy CAD Schroer Italia S.R.L. Via Piave, 1/E 20030 Senago (MI) Tel.: +39 02-38303267 Fax: +39 02-33303399 e-mail: info@cad-schroer.it www.cad-schroer.it USA CAD Schroer US, Inc. 34 Rand Place Pittsford, NY 14534 Tel: +1 866-SCHROER (866-724-7637) Fax: +1 866-724-1701 e-mail: info@cad-schroer.com www.cad-schroer.com
TABLE OF CONTENTS MEDUSA 4 Drafting Preface 15 Introduction to MEDUSA 17 What is MEDUSA?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Main Features of MEDUSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Introduction to MEDUSA Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 About Multi-segment Lines in MEDUSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Advantages of Using Multi-segment Lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Starting MEDUSA 23 Overview of the Work Environment 25 Quick Guide to the Work Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Using the Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 The Drawing Area and Popup Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Menu Bar and Pulldown Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Dialogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Tools and Tooltrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 File Selectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 File 45 The File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Creating a New Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Closing a Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 © CAD Schroer GmbH 3
Page 1: Drafting GUIDE VERSION 5.0 www.cad-
Page 5 and 6: MEDUSA 4 Drafting Zoom Selection .
Page 7 and 8: MEDUSA 4 Drafting Zoom Selection .
Page 9 and 10: MEDUSA 4 Drafting Navigating a Line
Page 11 and 12: MEDUSA 4 Drafting Editing Dimension
Page 13 and 14: MEDUSA 4 Drafting Flipping Arcs . .
Page 15 and 16: Book Conventions PREFACE MEDUSA 4 T
Page 17 and 18: INTRODUCTION TO MEDUSA This chapter
Page 19 and 20: Main Features of MEDUSA MEDUSA 4 Dr
Page 21 and 22: About Multi-segment Lines in MEDUSA
Page 23 and 24: STARTING MEDUSA To start MEDUSA, yo
Page 25 and 26: MEDUSA 4 Drafting OVERVIEW OF THE W
Page 27 and 28: Using the Mouse MEDUSA 4 Drafting U
Page 29 and 30: Keyboard Shift-Key MEDUSA 4 Draftin
Page 31 and 32: Menu Bar and Pulldown Menus MEDUSA
Page 33 and 34: OK Apply Cancel Help Figure 11 Ofte
Page 35 and 36: Dashboard MEDUSA 4 Drafting Dashboa
Page 37 and 38: Figure 16 Tool sets and tools MEDUS
Page 39 and 40: Choosing a Tooltray MEDUSA 4 Drafti
Page 41 and 42: Probe Specifiers MEDUSA 4 Drafting
Page 43 and 44: Sorting File List MEDUSA 4 Drafting
Page 45 and 46: FILE MEDUSA 4 Drafting This chapter
Page 47 and 48: Creating a New Sheet You can create
Page 49 and 50: MEDUSA 4 Drafting Creating a New Sh
Page 51 and 52: Saving Sheets The File pulldown men
Page 53 and 54:
Figure 28 The Filter Pulldown Menu
Page 55 and 56:
Opening a File MEDUSA 4 Drafting Op
Page 57 and 58:
Figure 33 Preview of the Open Sheet
Page 59 and 60:
Popup Menu for the Lists of Sheets
Page 61 and 62:
MEDUSA 4 Drafting Sheet Administrat
Page 63 and 64:
Modifying Loading Behavior MEDUSA 4
Page 65 and 66:
Exporting a File MEDUSA 4 Drafting
Page 67 and 68:
Plotting a Sheet To display the Plo
Page 69 and 70:
MEDUSA 4 Drafting Plotting a Sheet
Page 71 and 72:
Directory MEDUSA 4 Drafting Printin
Page 73 and 74:
MEDUSA 4 Drafting Printing a Sheet
Page 75 and 76:
Explicit Hard Soft Auto MEDUSA 4 Dr
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Sheet Properties MEDUSA 4 Drafting
Page 83 and 84:
MEDUSA 4 Drafting Sheet Properties
Page 85 and 86:
MEDUSA 4 Drafting Sheet Properties
Page 87 and 88:
have a content, otherwise an error
Page 89 and 90:
Quitting MEDUSA To quit MEDUSA choo
Page 91 and 92:
EDIT MEDUSA 4 Drafting This chapter
Page 93 and 94:
Find text MEDUSA 4 Drafting The Edi
Page 95 and 96:
Redo 1. Choose Redo from the Edit m
Page 97 and 98:
Paste Popup Menu While Pasting Afte
Page 99 and 100:
Area Cut and Area Copy MEDUSA 4 Dra
Page 101 and 102:
Within the dialog you can narrow do
Page 103 and 104:
SELECT MEDUSA 4 Drafting In this ch
Page 105 and 106:
The Select Menu MEDUSA 4 Drafting T
Page 107 and 108:
Selecting with the Mouse MEDUSA 4 D
Page 109 and 110:
Select with the Popup Menu MEDUSA 4
Page 111 and 112:
Figure 77 Changing Selection Set: E
Page 113 and 114:
MEDUSA 4 Drafting Power Selection T
Page 115 and 116:
Build Filter from Element Selection
Page 117 and 118:
Save Filter as User Button MEDUSA 4
Page 119 and 120:
Selecting Elements by Boundary Grou
Page 121 and 122:
Selecting Elements by Area MEDUSA 4
Page 123 and 124:
VIEW MEDUSA 4 Drafting This chapter
Page 125 and 126:
Zoom to scale zooms into the probed
Page 127 and 128:
Set of Tooltrays MEDUSA 4 Drafting
Page 129 and 130:
Dynamic Pan and Zoom MEDUSA 4 Draft
Page 131 and 132:
Storing and Restoring Windows MEDUS
Page 133 and 134:
Figure 97 Store and Restore: Show P
Page 135 and 136:
Figure 99 View Window Displayed MED
Page 137 and 138:
Copy and Paste Between View Windows
Page 139 and 140:
DISPLAY MEDUSA 4 Drafting This chap
Page 141 and 142:
GRIDS This chapter describes how to
Page 143 and 144:
The menu offers the following param
Page 145 and 146:
Grid Properties Dialog Figure 106 G
Page 147 and 148:
Cartesian Polar MEDUSA 4 Drafting C
Page 149 and 150:
Choosing the Current Grid MEDUSA 4
Page 151 and 152:
Activating and Deactivating a Grid
Page 153 and 154:
Modifying a Grid MEDUSA 4 Drafting
Page 155 and 156:
Deleting a Grid To delete a grid: 1
Page 157 and 158:
LAYERS This chapter describes how t
Page 159 and 160:
MEDUSA 4 Drafting Introduction to L
Page 161 and 162:
Default Layer Allocation MEDUSA 4 D
Page 163 and 164:
MEDUSA 4 Drafting Layer Properties
Page 165 and 166:
Layer Set Management MEDUSA 4 Draft
Page 167 and 168:
MEDUSA 4 Drafting Layer Set Managem
Page 169 and 170:
MEDUSA 4 Drafting Customize Layers
Page 171 and 172:
MEDUSA 4 Drafting Customize Layer S
Page 173 and 174:
Layer Datum MEDUSA 4 Drafting Layer
Page 175 and 176:
. If Incremental is activated: The
Page 177 and 178:
OPTIONS This chapter gives you info
Page 179 and 180:
Defaults - Overview MEDUSA 4 Drafti
Page 181 and 182:
MEDUSA 4 Drafting Common Settings T
Page 183 and 184:
Legible Height MEDUSA 4 Drafting Le
Page 185 and 186:
Sheet History Stack MEDUSA 4 Drafti
Page 187 and 188:
Switches - Control User Options MED
Page 189 and 190:
MEDUSA 4 Drafting Switches - Contro
Page 191 and 192:
Parameters for the Sheet Units sect
Page 193 and 194:
You find the following entries insi
Page 195 and 196:
MEDUSA 4 Drafting Dimension Default
Page 197 and 198:
MEDUSA 4 Drafting Hit Radius Coinci
Page 199 and 200:
MEDUSA 4 Drafting Arc Factor and B
Page 201 and 202:
Settings for References MEDUSA 4 Dr
Page 203 and 204:
Administrator Mode MEDUSA 4 Draftin
Page 205 and 206:
Plotter Configuration MEDUSA 4 Draf
Page 207 and 208:
Properties MEDUSA 4 Drafting Config
Page 209 and 210:
Select Background Color MEDUSA open
Page 211 and 212:
UTILITIES MEDUSA 4 Drafting This ch
Page 213 and 214:
MEDUSA 4 Drafting The Utilities Men
Page 215 and 216:
Using Fixed Values in Steps of 45 D
Page 217 and 218:
Figure 158 Example of Specifying an
Page 219 and 220:
Figure 160 The Standard Point Funct
Page 221 and 222:
Reads the cached data and merges th
Page 223 and 224:
To Delete a User Attribute MEDUSA 4
Page 225 and 226:
Un-number & Re-number MEDUSA 4 Draf
Page 227 and 228:
MEDUSA 4 Drafting Un-number & Re-nu
Page 229 and 230:
Primary Direction: Horizontal Figur
Page 231 and 232:
Figure 173 Search Direction: Horizo
Page 233 and 234:
Primary Direction: Vertical Primary
Page 235 and 236:
Primary Direction: vertical Figure
Page 237 and 238:
Seed Number MEDUSA 4 Drafting Un-nu
Page 239 and 240:
MEDUSA 4 Drafting Un-number & Re-nu
Page 241 and 242:
With it, the drawing is ready for r
Page 243 and 244:
The Calculator MEDUSA offers a calc
Page 245 and 246:
Trail File MEDUSA 4 Drafting Trail
Page 247 and 248:
Replay the Trail File For recalling
Page 249 and 250:
Instancing MEDUSA 4 Drafting Instan
Page 251 and 252:
Spacing Offset Angle defines the di
Page 253 and 254:
Add Current View as Preview MEDUSA
Page 255 and 256:
Accelerator and Map Keys MEDUSA 4 D
Page 257 and 258:
MEDUSA 4 Drafting Accelerator and M
Page 259 and 260:
Bacis1 BACIS1 AND WINDOWS The Bacis
Page 261 and 262:
LICENSES This chapter explains the
Page 263 and 264:
TOOLBAR This chapter introduces MED
Page 265 and 266:
Adjust the Contents of the Toolbar
Page 267 and 268:
Sheets Toolbar MEDUSA 4 Drafting Sh
Page 269 and 270:
View Toolbar MEDUSA 4 Drafting View
Page 271 and 272:
Restore You can display any saved w
Page 273 and 274:
Measure Toolbar MEDUSA 4 Drafting M
Page 275 and 276:
Precision of measurements You can d
Page 277 and 278:
Measuring Angles MEDUSA 4 Drafting
Page 279 and 280:
MEDUSA 4 Drafting Measure To measur
Page 281 and 282:
MEDUSA 4 Drafting Scale View The co
Page 283 and 284:
Working with Scale Views MEDUSA 4 D
Page 285 and 286:
Measuring MEDUSA 4 Drafting Scale V
Page 287 and 288:
Figure 239 Insert Detail into Scale
Page 289 and 290:
Tree Navigation Toolbar MEDUSA 4 Dr
Page 291 and 292:
Selection Toolbar The Selection Too
Page 293 and 294:
HELP This chapter explains how to g
Page 295 and 296:
MEDUSA 4 Drafting Using the Help Me
Page 297 and 298:
Context Sensitive Help MEDUSA 4 Dra
Page 299 and 300:
DASHBOARD This section describes th
Page 301 and 302:
The Components of the Dashboard MED
Page 303 and 304:
Using the Dashboard to Display Prop
Page 305 and 306:
MEDUSA 4 Drafting Using the Dashboa
Page 307 and 308:
Figure 256 Example Sub-Dashboard: S
Page 309 and 310:
Introduction to Styles MEDUSA 4 Dra
Page 311 and 312:
MEDUSA 4 Drafting Introduction to S
Page 313 and 314:
MEDUSA 4 Drafting Style Definitions
Page 315 and 316:
MEDUSA 4 Drafting Style Tree The St
Page 317 and 318:
MEDUSA 4 Drafting Style Tree When y
Page 319 and 320:
PROBE SPECIFIERS MEDUSA 4 Drafting
Page 321 and 322:
Choosing a Probe Specifier MEDUSA 4
Page 323 and 324:
MEDUSA 4 Drafting Using Probe Speci
Page 325 and 326:
Free Probe MEDUSA 4 Drafting Free P
Page 327 and 328:
Intersection Probe MEDUSA 4 Draftin
Page 329 and 330:
Segment Probe MEDUSA 4 Drafting Seg
Page 331 and 332:
Center Probe MEDUSA 4 Drafting Cent
Page 333 and 334:
Tangent Probe MEDUSA 4 Drafting Tan
Page 335 and 336:
Last Probe MEDUSA 4 Drafting Last P
Page 337 and 338:
Datum of Selected Element Probe Spe
Page 339 and 340:
Entering Points using Cartesian Coo
Page 341 and 342:
STATUS AREA MEDUSA 4 Drafting This
Page 343 and 344:
MEDUSA 4 Drafting Overview Status A
Page 345 and 346:
MEDUSA 4 Drafting Groups To create
Page 347 and 348:
Dock and Undock the Tree Viewer MED
Page 349 and 350:
Creating a Nested Group MEDUSA 4 Dr
Page 351 and 352:
Interacting with the Tree Viewer ME
Page 353 and 354:
Using the Tree Navigation Toolbar M
Page 355 and 356:
MEDUSA 4 Drafting Interacting with
Page 357 and 358:
User Attributes MEDUSA 4 Drafting U
Page 359 and 360:
LINES MEDUSA 4 Drafting This chapte
Page 361 and 362:
Line Geometry MEDUSA 4 Drafting Lin
Page 363 and 364:
Creating a Line This chapter gives
Page 365 and 366:
Popup Menu While Drawing a Line MED
Page 367 and 368:
Closed Geometry MEDUSA 4 Drafting C
Page 369 and 370:
Paste MEDUSA 4 Drafting Closed Geom
Page 371 and 372:
OK, Apply, Cancel, Help work as usu
Page 373 and 374:
Examples Creating Circle touching t
Page 375 and 376:
Figure 318 Dashboard 2D Features: S
Page 377 and 378:
Offset Lines Tools MEDUSA 4 Draftin
Page 379 and 380:
MEDUSA 4 Drafting Offset Lines Tool
Page 381 and 382:
Line Styles MEDUSA 4 Drafting Line
Page 383 and 384:
Figure 331 Decor Line Types The fol
Page 385 and 386:
MEDUSA 4 Drafting Line Properties 3
Page 387 and 388:
Line Point Properties MEDUSA 4 Draf
Page 389 and 390:
Point Functions MEDUSA 4 Drafting P
Page 391 and 392:
Figure 339 Standard Point Functions
Page 393 and 394:
Figure 342 Point Functions-Pulldown
Page 395 and 396:
Figure 344 Traced Line 4. Exit tool
Page 397 and 398:
Editing a Line MEDUSA 4 Drafting Ed
Page 399 and 400:
MEDUSA 4 Drafting Edit Line Popup M
Page 401 and 402:
Extend Line MEDUSA 4 Drafting Compl
Page 403 and 404:
Split or Join Lines These tools all
Page 405 and 406:
MEDUSA 4 Drafting Complex Line Edit
Page 407 and 408:
Figure 359 Tangent Arc Dialog and a
Page 409 and 410:
Figure 362 Example Modify Curve of
Page 411 and 412:
Other Tools MEDUSA 4 Drafting Compl
Page 413 and 414:
Fillet Lines After selecting the to
Page 415 and 416:
Chamfer Lines MEDUSA 4 Drafting Com
Page 417 and 418:
Reversing the Line Direction MEDUSA
Page 419 and 420:
2D MODELING This chapter describes
Page 421 and 422:
Centerlines, Hidden Lines and Cross
Page 423 and 424:
Figure 375 Showing and Hiding Norma
Page 425 and 426:
MEDUSA 4 Drafting Sweeping Profiles
Page 427 and 428:
Edge Projection MEDUSA 4 Drafting E
Page 429 and 430:
Project End Elevations of Shafts an
Page 431 and 432:
Rotate Profiles to Form Shafts MEDU
Page 433 and 434:
Rotate Profiles to Form Sectioned H
Page 435 and 436:
TRANSFORMATION MEDUSA 4 Drafting Th
Page 437 and 438:
Transformation on Selected Elements
Page 439 and 440:
MEDUSA 4 Drafting Transformation on
Page 441 and 442:
MEDUSA 4 Drafting Transformation on
Page 443 and 444:
Undo, Exit Tool work as usual. MEDU
Page 445 and 446:
Figure 402 Array The Array dialog h
Page 447 and 448:
Boundary Groups MEDUSA 4 Drafting B
Page 449 and 450:
Transform Boundary Groups MEDUSA 4
Page 451 and 452:
Move Geometry by Grid Spacing MEDUS
Page 453 and 454:
Connect and Clear Lines MEDUSA 4 Dr
Page 455 and 456:
SYMBOLS MEDUSA 4 Drafting This chap
Page 457 and 458:
Overview of Symbol Tools MEDUSA 4 D
Page 459 and 460:
Figure 419 Symbols Dialog Use this
Page 461 and 462:
MEDUSA 4 Drafting Temporary Symbols
Page 463 and 464:
Transforming Symbols MEDUSA 4 Draft
Page 465 and 466:
Mirroring a Symbol MEDUSA 4 Draftin
Page 467 and 468:
Symbol Size MEDUSA 4 Drafting Symbo
Page 469 and 470:
Reversing Symbol Property Changes M
Page 471 and 472:
Previewing Symbol Files MEDUSA 4 Dr
Page 473 and 474:
DIAGRAM SYMBOLS MEDUSA 4 Drafting A
Page 475 and 476:
Creating MEDUSA 4 Drafting Creating
Page 477 and 478:
Saving MEDUSA 4 Drafting Saving Cor
Page 479 and 480:
Figure 435 Diagram Symbol Over Line
Page 481 and 482:
Selecting and Deleting Selecting 1.
Page 483 and 484:
CONSTRUCTION LINES MEDUSA 4 Draftin
Page 485 and 486:
Construction Line Tools The tools t
Page 487 and 488:
Creating an Oblique Construction Li
Page 489 and 490:
Creating Construction Circles tange
Page 491 and 492:
Figure 448 Example of the Creation
Page 493 and 494:
Offset Construction Lines MEDUSA 4
Page 495 and 496:
MEDUSA 4 Drafting Offset Constructi
Page 497 and 498:
Figure 458 Example for Incremental
Page 499 and 500:
Hiding Construction Lines MEDUSA 4
Page 501 and 502:
Transported Construction Lines MEDU
Page 503 and 504:
Deflection Angles MEDUSA 4 Drafting
Page 505 and 506:
Figure 468 Popup Menu For Projectio
Page 507 and 508:
MEDUSA 4 Drafting Projected Constru
Page 509 and 510:
Properties To display the X-Line Se
Page 511 and 512:
MEDUSA 4 Drafting Dynamic Construct
Page 513 and 514:
Creating Dynamic Construction Lines
Page 515 and 516:
Figure 481 Crossed Dynamic Construc
Page 517 and 518:
MEDUSA 4 Drafting Creating Dynamic
Page 519 and 520:
DIMENSIONING MEDUSA 4 Drafting This
Page 521 and 522:
Dimensioning Standards MEDUSA 4 Dra
Page 523 and 524:
MEDUSA 4 Drafting Setting the Defau
Page 525 and 526:
MEDUSA 4 Drafting Setting the Defau
Page 527 and 528:
Creating Basic Linear Dimensions ME
Page 529 and 530:
Figure 494 Example of Parallel Dime
Page 531 and 532:
Linear Dimension Properties MEDUSA
Page 533 and 534:
MEDUSA 4 Drafting Linear Dimension
Page 535 and 536:
MEDUSA 4 Drafting Linear Dimension
Page 537 and 538:
Imperial Text Figure 507 Imperial T
Page 539 and 540:
Graphic Scaling Figure 512 Graphic
Page 541 and 542:
Properties Undo Exit Tool MEDUSA 4
Page 543 and 544:
Text Format Figure 517 Angular Dime
Page 545 and 546:
Dimensioning a Radius with an Off S
Page 547 and 548:
Standard Figure 521 Standard MEDUSA
Page 549 and 550:
Standard Figure 524 Standard MEDUSA
Page 551 and 552:
MEDUSA 4 Drafting Creating Symmetri
Page 553 and 554:
Creating Datum Offset Dimensions ME
Page 555 and 556:
Creating Isometric Dimensions Dialo
Page 557 and 558:
MEDUSA 4 Drafting Creating Isometri
Page 559 and 560:
Feature Control Frames and Datum ME
Page 561 and 562:
Right Angled switches on the Right
Page 563 and 564:
Edit a Dimension Part MEDUSA 4 Draf
Page 565 and 566:
MEDUSA 4 Drafting Editing Dimension
Page 567 and 568:
MEDUSA 4 Drafting Editing Dimension
Page 569 and 570:
Arranging Coordinate Dimensions Tex
Page 571 and 572:
For adding gaps in dimension leader
Page 573 and 574:
Part 3 Part 4 Part 5 Figure 556 Wel
Page 575 and 576:
Figure 563 Welding Symbols 7 MEDUSA
Page 577 and 578:
Rotating a Welding Symbol MEDUSA 4
Page 579 and 580:
MEDUSA 4 Drafting Surface Finish Sy
Page 581 and 582:
TEXT MEDUSA 4 Drafting This chapter
Page 583 and 584:
Creating Text This section shows yo
Page 585 and 586:
Text Properties MEDUSA 4 Drafting T
Page 587 and 588:
MEDUSA 4 Drafting Text Properties P
Page 589 and 590:
Textbox Url MEDUSA 4 Drafting Repla
Page 591 and 592:
Using the Text Properties dialog ME
Page 593 and 594:
Multiple Selections of Text MEDUSA
Page 595 and 596:
URL Text MEDUSA 4 Drafting URL Text
Page 597 and 598:
MEDUSA 4 Drafting URL Text • If a
Page 599 and 600:
MEDUSA 4 Drafting Multi-Line Text
Page 601 and 602:
MEDUSA 4 Drafting Multi-Line Text p
Page 603 and 604:
MEDUSA 4 Drafting Balloon Text Lead
Page 605 and 606:
Balloon Text Dashboard As you creat
Page 607 and 608:
MEDUSA 4 Drafting Balloon Text Plea
Page 609 and 610:
Unicode Text General MEDUSA 4 Draft
Page 611 and 612:
Short-Info MEDUSA 4 Drafting Short-
Page 613 and 614:
TABLES MEDUSA 4 Drafting MEDUSA pro
Page 615 and 616:
Overview Table Creation Dialog This
Page 617 and 618:
Creating a New Table MEDUSA 4 Draft
Page 619 and 620:
To append a row below the existing
Page 621 and 622:
Edit Tables MEDUSA 4 Drafting Edit
Page 623 and 624:
Style MEDUSA 4 Drafting Properties
Page 625 and 626:
Scanning multiple sheets to create
Page 627 and 628:
FIT AND BORE HOLE TABLES • Fit Ta
Page 629 and 630:
MEDUSA 4 Drafting Fit Tables • Fo
Page 631 and 632:
Distributed Example Fits XML File M
Page 633 and 634:
Table number is the identification
Page 635 and 636:
MEDUSA 4 Drafting Bore Hole Tables
Page 637 and 638:
Editing Drilling Data MEDUSA 4 Draf
Page 639 and 640:
MEDUSA 4 Drafting Bore Hole Tables
Page 641 and 642:
Figure 622 Warning: Start Cleanup M
Page 643 and 644:
MEDUSA 4 Drafting PREDEFINED GRAPHI
Page 645 and 646:
Adding Prims to a Sheet MEDUSA 4 Dr
Page 647 and 648:
MEDUSA 4 Drafting Adding Prims to a
Page 649 and 650:
Prim Properties MEDUSA 4 Drafting P
Page 651 and 652:
Changing Prim Properties There are
Page 653 and 654:
How MEDUSA Stores and Updates Prims
Page 655 and 656:
AREA FILLS MEDUSA 4 Drafting This c
Page 657 and 658:
Defining a Closed Area MEDUSA 4 Dra
Page 659 and 660:
Using the Crosshatch or Stipple Too
Page 661 and 662:
Apply MEDUSA 4 Drafting Using the C
Page 663 and 664:
Crosshatch Properties MEDUSA 4 Draf
Page 665 and 666:
Dialog MEDUSA 4 Drafting Crosshatch
Page 667 and 668:
Stipple Properties MEDUSA 4 Draftin
Page 669 and 670:
Figure 641 Setting the Spacing Betw
Page 671 and 672:
MEDUSA 4 Drafting Selecting and Del
Page 673 and 674:
Filling Disjoint Areas MEDUSA 4 Dra
Page 675 and 676:
Masking Hidden Lines MEDUSA 4 Draft
Page 677 and 678:
MEDUSA 4 Drafting Masking Hidden Li
Page 679 and 680:
MEDUSA 4 Drafting Boolean Operation
Page 681 and 682:
REFERENCE SHEET PROCEDURE MEDUSA 4
Page 683 and 684:
Porthole Tools MEDUSA 4 Drafting Po
Page 685 and 686:
MEDUSA 4 Drafting Creating Porthole
Page 687 and 688:
Creating a New Reference MEDUSA 4 D
Page 689 and 690:
MEDUSA 4 Drafting Creating a New Re
Page 691 and 692:
Comparing a Reference MEDUSA 4 Draf
Page 693 and 694:
MEDUSA 4 Drafting Load, Convert, De
Page 695 and 696:
SMART EDIT This chapter explains th
Page 697 and 698:
Calling SMART Edit MEDUSA 4 Draftin
Page 699 and 700:
SMART Edit Tools MEDUSA 4 Drafting
Page 701 and 702:
Over-Dimensioning MEDUSA 4 Drafting
Page 703 and 704:
Edit Dimension Lines MEDUSA 4 Draft
Page 705 and 706:
Datum MEDUSA 4 Drafting Datum When
Page 707 and 708:
Figure 678 SMART Edit: Drag Orthogo
Page 709 and 710:
Dragging MEDUSA 4 Drafting Dragging
Page 711 and 712:
Show Relations MEDUSA 4 Drafting Sh
Page 713 and 714:
SMART DRAFTING MEDUSA 4 Drafting SM
Page 715 and 716:
MEDUSA 4 Drafting Calling SMART Dra
Page 717 and 718:
Line Arc Flip Arc New Line Close Li
Page 719 and 720:
Alt+q Toggle Grid Steps Angle in th
Page 721 and 722:
MEDUSA 4 Drafting Drawing Lines Acc
Page 723 and 724:
Drawing Arcs Please note: Before yo
Page 725 and 726:
Using Construction Points MEDUSA 4
Page 727 and 728:
MEDUSA 4 Drafting Extending an Exis
Page 729 and 730:
MEDUSA 4 Drafting CUSTOMIZING THE U
Page 731 and 732:
Customizing MEDUSA Tools Copy Tools
Page 733 and 734:
Modifying Custom Tools MEDUSA 4 Dra
Page 735 and 736:
Deleting Custom Tools MEDUSA 4 Draf
Page 737 and 738:
MEDUSA 4 Drafting Saving Changes of
Page 739 and 740:
Figure 1 Example of an Element Prop
Page 741 and 742:
Figure 174 Result . . . . . . . . .
Page 743 and 744:
Figure 362 Example Modify Curve of
Page 745 and 746:
zontal Feature Control Frame . . .
Page 747 and 748:
A B C D E F G H I J K L M N O P Q R
Page 749 and 750:
MEDUSA 4 Drafting A B C D E F G H I
Page 751 and 752:
Page 753 and 754:
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
Page 761 and 762:
Page 763 and 764:
Page 765 and 766:
Page 767 and 768:
show all

G UIDE - CAD Schroer

Create successful ePaper yourself

Delete template?

Save as template?