G UIDE - CAD Schroer

MEDUSA 4 Drafting
Overview of the Work Environment
Toolbar
The toolbar, positioned below the menu bar, has a selection of the more frequently-used items
from the pulldown menus. By default you find items like opening and saving sheets, zoom functions
and line navigation.
The following figure shows the toolbar after starting MEDUSA the first time.
Figure 12 The Toolbar
Please note: Your toolbar can differ from that one given above if the System Administrator
changed the settings.
For choosing an item from the toolbar point to the button and click the left mouse button.
You can adjust the toolbar to your needs by adding and deleting items.
For adjusting the toolbar items using the main menu do the following:
1. Move the cursor upon the entry View in the main menu.
2. Click the left mouse button.
A pulldown menu opens offering the items of View.
3. Move the cursor on Toolbars.
The following pulldown menu opens:
Figure 13 View Pulldown Menu
The check mark in front of an entry shows you that the appropriate toolbar entry is visible.
If there is no check mark the appropriate toolbar entry is not displayed.
4. Click left on the toolbar you want to hide or display.
The pulldown menu disappears and the toolbar is changed according to your selection.
34 © CAD Schroer GmbH