ISOPRO® Type IPT - Spanelas

8
ISOPRO ®
Building physics – Fire protection DIN 4109
Fire-resistance class F 30
All ISOPRO ® elements are categorised as fire protection class F30. The requirements to be met for the complete construction
are illustrated in the following diagrams:
F30 - wall area construction F30 - door area construction
mineral-based mineral-based plaster plaster
screeding / screeding plastering / plastering
ISOPRO element ISOPRO element
screeding / screeding plastering / plastering
ISOPRO element ISOPRO element
mineral-based mineral-based plaster plaster mineral-based mineral-based plaster plaster
Fire-resistance class F 90
All ISOPRO ® elements are also supplied to fire-resistance class F90, meeting the technical requirements for fire protection
of balconies etc.
The designation F90 is added to the element identification e.g. ISOPRO ® IPT 55 cv 30 F90.
A1 material
non-flammable
The ISOPRO ® elements are fitted with fire protection plates attached to the top side and the under side.
The construction can be seen in the sketch of the system below.
detail 1
detail 1
A1 material
non-flammable
It is self-evident that to meet the requirements of the fire-resistance class F90, all other adjacent construction elements
must also satisfy these requirements. For constructions with selected-point connections it is necessary to ensure that the
intermediate insulation used also meets the fire-resistance requirements.
www.h-bau.com
100
15
15
8
F90 fire fire protection slab
F90 fire fire protection slab