ISOPRO® Type IPT - Spanelas
ISOPRO® Type IPT - Spanelas
ISOPRO® Type IPT - Spanelas
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
alcony slab<br />
ny slab<br />
�<br />
balcony slab<br />
ISOPRO ® ny <strong>Type</strong> IP slab<br />
balcony slab<br />
� �<br />
ny slab<br />
�<br />
balcony slab<br />
� �<br />
balcony slab<br />
A<br />
�<br />
� �<br />
�<br />
� �<br />
concrete ≥ 25/30 concrete ≥ 20/25<br />
ny slab<br />
18<br />
ISOPRO ® <strong>Type</strong> IP<br />
On-site reinforcement and installation instructions<br />
�<br />
A<br />
ISOPRO ® type IP with on-site mesh support<br />
The mesh support replaces the suspension reinforcement.<br />
It should be installed at a distance of ≤ 100 mm from the<br />
insulation and raised up until it is immediately below the<br />
tension reinforcement. The diameter of the diagonals must<br />
be at least 5 mm. The transverse force rod can be positioned<br />
above or below the mesh support.<br />
www.h-bau.com<br />
ISOPRO ® <strong>Type</strong> IP<br />
ny slab<br />
�<br />
A<br />
�<br />
te ≥ 25/30 concrete ≥ 20/25<br />
A<br />
�<br />
�<br />
�<br />
�<br />
�<br />
Section A - A<br />
Section A - integral A suspension reinforcement<br />
integral suspension � reinforcement<br />
�<br />
�<br />
�<br />
ISOPRO tension rods<br />
� insert edging according to DIN<br />
� � lower reinforcement<br />
� ISOPRO transverse force rods ISOPRO compression support � distribution rods Ø 8<br />
� lower reinforcement<br />
ISOPRO transverse force rods<br />
Installation instructions<br />
Lay the lower reinforcement � for the floor and balcony<br />
slab.<br />
Install ISOPRO ® IP and align. The direction of alignment<br />
(arrow symbol on top of element) must be followed.<br />
Insert the balcony-side edging � in accordance with<br />
DIN 1045-1 and connect to the ISOPRO ® tension rods.<br />
The ISOPRO ® tension rods and the support reinforcement<br />
are at the same level. If required. the binder on<br />
the tension rod level can be cut through.<br />
Lay the distribution rods. one Ø 8 top and bottom item<br />
�.<br />
In the case of indirect support, lay the floor-side edging<br />
� according to DIN 1045-1 and distribution rods �<br />
Ø 8.<br />
Insert the upper slab reinforcement � and bind together<br />
with the ISOPRO ® tension rods. The ISOPRO ®<br />
tension rods and the support reinforcement are at the<br />
same level.<br />
It is necessary when concreting to fill and pack uniformly<br />
on both sides in order to prevent movement of<br />
the ISOPRO ® elements<br />
balcony<br />
Mesh support<br />
ISOPRO tension rods<br />
ISOPRO compression support<br />
100<br />
� upper reinforcement<br />
� upper reinforcement<br />
� insert edging according to DIN<br />
� distribution rods Ø 8<br />
slab
Change language