ISOPRO® Type IPT - Spanelas
ISOPRO® Type IPT - Spanelas
ISOPRO® Type IPT - Spanelas
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
spacing e<br />
26<br />
ISOPRO ® <strong>Type</strong> IP & <strong>IPT</strong><br />
Expansion joint spacing<br />
Expansion joint spacing ISOPRO ®<br />
The external concrete components must have expansion joints at right angles to the insulation layer in order to limit the<br />
stress caused by changes in temperature. The spacing of the joints e is given in the following table:<br />
expansion joint spacing e<br />
balcony<br />
Expansion joint spacing for ISOPRO ® type IP and <strong>IPT</strong><br />
Rod diameter [mm] ≤ 10 12 14 16 20<br />
Joint spacing e [m] 13.00 11.30 10.10 9.20 8.00<br />
For corner constructions, the maximum rod leg length is e/2<br />
www.h-bau.com<br />
expansion joint dowelling<br />
expansion joint e.g. HED-S + plastic sleeves<br />
expansion joint<br />
ISOPRO ISOPRO<br />
expansion joint<br />
expansion joint spacing e<br />
ISOPRO <strong>Type</strong> <strong>IPT</strong> Corner<br />
e /2<br />
balcony<br />
e /2<br />
ISOPRO <strong>Type</strong> <strong>IPT</strong> Corner<br />
expansion joint<br />
e /2<br />
balcony
Change language