ACCESSORY LINE catalogue - Kendrion Binder

6
27.5
35
7
GDSB211
27.5
52
M3
Ø 22.5
Type GDSB 211
plug-in connector DIN EN 175301-803 (DIN 43650-A)
with integral rectifier GDSB 211
max. 230 VAC ±10% / 2 ADC
order No: 314 1051
Plug-in connectors
2-pole plug-in connectors with PE line connection
Plug-in connectors are detachable connections specially
designed for electromagnetic devices. The 2-pole
versions are used to connect single-direction linear
solenoids and electromagnetic clamps. The cable
outlet can be rotated through 4 x 90° by inserting
the contact carrier accordingly.
The plug-in connector is secured with a machine
screw (supplied) after being plugged onto the device
pins. This guarantees an effective seal between the
plug-in connectors with rectifier
34
39
7
GDSBV211
34
18
M3
72
Type GDSBV 211
plug-in connector DIN EN 175301-803 (DIN 43650-A),
protective varistor with integral rectifier GDSBV 211
max. 230 VAC ±10% / 4 ADC
order No: 314 1049
two and prevents the connector from becoming
accidentally detached.
A screwed cable gland, thread size Pg 11 (GD209: Pg 9),
serves to seal the cable entry.
The contact elements are suitable for connecting wire
cross-sections up to max. 1.5 mm 2 .
Air clearance and leakage path to VDE 0110.
Insulation class C.
When plugged in and secured, the connection meets the
requirements of class of protection IP 65 to IEC 60529.
www.kendrionmt.com
CE
These components are not electronic or electrical
devices in the meaning of the Machinery
Directive 98/37/EC, but instead are merely
intended for incorporation in other machines or
systems, and are not for use by end-users. The user
must guarantee that his end product complies with
the appropriate directives.
Low Voltage Directive 73/23/EEC.
We declare compliance with the following standards:
HD625.1 S1 (1996)
IEC 60529 (1991
The products are components in the meaning of the
Machinery Directive 98/37/EC. According to
this directive, such products incorporated in a
machine may not be operated until said machine’s
conformity with the EC directive has been established.
A manufacturer’s declaration can be obtained on
request.
Permissible continuous maximum temperature
90°C; the connection can withstand temperatures of
up to 120°C briefly without suffering any damage.
When using the GDSB 211 or GDSBV 211 plug-in
connector with integral rectifier, the plug-in connector
can be used as a direct connecting element between
an AC mains system and a DC consumer.
Four silicon diodes form a bridge circuit. A varistor
connected in parallel on the AC side protects the
bridge rectifier against voltage spikes from the
mains.