Click here for PDF - Society of Manufacturing Engineers
Click here for PDF - Society of Manufacturing Engineers
Click here for PDF - Society of Manufacturing Engineers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tooling & Workholding<br />
and alloy steels, cast and <strong>for</strong>ged steels, tool and die steels,<br />
and 300 series stainless up to R c 35. Taps are ground with an<br />
increased pitch diameter, designated 2BX which optimizes the<br />
gage tolerance <strong>for</strong> a 2B class <strong>of</strong> fit. DZBF Series are available<br />
110 <strong>Manufacturing</strong>EngineeringMedia.com | August 2012<br />
from ½ to 2" (12.7–25.4 mm).<br />
Emuge Corp.<br />
Ph: 800-323-3013<br />
Web site: www.emuge.com<br />
ER Collets<br />
ER collets have been added to the Fixture<br />
Pro five-axis quick-change workholding<br />
system to hold rods and other round<br />
workpieces. The base <strong>of</strong> the ER collet<br />
is designed to mount to Fixture Pro risers<br />
and pallet system to allow stack up<br />
that gets parts <strong>of</strong>f the table and allows<br />
machining on all sides. At each level, the<br />
Fixture Pro system <strong>of</strong>fers quick-change<br />
capabilities <strong>for</strong> complete part-to-part<br />
changeover in less than 60 sec. The ER<br />
collets convert a five-axis CNC into a lathe<br />
and give complete quick-change capabili-<br />
ties to reduce setup times. ER collets can<br />
be mounted to flower fixture which holds<br />
three collets at an angle ideal <strong>for</strong> five-axis<br />
machining. ER collets are available in ER<br />
11, ER 16, ER 20, ER 25, and ER 32.<br />
Jergens Inc.<br />
Ph: 877-486-1454<br />
Web site: www.jergensinc.com<br />
Driven Tools<br />
New tooling was developed in cooperation<br />
with local medical manufacturers<br />
and Command’s parent company, EW<br />
Tool Technologies. All Swiss live tools<br />
feature a labyrinth seal that shields<br />
internal components from contaminants<br />
during operation, housings <strong>of</strong> highstrength<br />
alloy steel, and solid shafts<br />
<strong>of</strong> tool steel that have less flex and
Change language