Click here for PDF - Society of Manufacturing Engineers

The test fixture is ground to mirror
a spindle of a CNC machine
is accurate to 1:10,000". The
gage will be demonstrated at
IMTS.
J&M Machine
Ph: 440-357-1234
Web site: www.jmmachineinc.com
Miniature ID Applications
T-Micro system of replaceable carbide inserts is designed for
machining very small internal diameters, including grooving,
profiling, chamfering, face grooving/deep face grooving,
threading, and back turning starting at 0.024" (0.6 mm).
T-Micro system is a two-piece design, consisting of a sleeve
and replaceable
carbide inserts.
Inserts feature coolant
thru capabilities
and are available
in grade TT9030, a
submicron substrate
with PVD-TiAlN coating.
A locating pin
Inside the T-Micro
sleeve ensures repeatability, allowing operators to return to
machining without resetting the tool. The locating pin also
allows operators to replace inserts without removing the sleeve
from the tool post. The T-Micro sleeve also avoids interference
when replacing the insert allowing simplified tool change on
Swiss-type and other multispindle lathes. Shank sizes include
inch and metric to accommodate all machines.
Ingersoll Cutting Tools
Ph: 815-987-6000
Web site: www.ingersoll-imc.com
Automotive Power Chucks,
Indexable Inserts
TMX power chucks for face
clamping aluminum automobile
wheels improves concentricity
and minimizes deformation of
thin walled parts during machining.
Along with the actuated chuck,
sealed pull-down chucks widely used
in high-volume manufacturing applications will be shown.
These chucks provide high-speed, accurate part positioning
and fully sealed bodies for trouble-free operation with minimal
August 2012 | ManufacturingEngineeringMedia.com 119