Click here for PDF - Society of Manufacturing Engineers
Click here for PDF - Society of Manufacturing Engineers
Click here for PDF - Society of Manufacturing Engineers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tooling & Workholding<br />
geometries, coatings, and designs; one <strong>for</strong> alloys under R c 40<br />
and one <strong>for</strong> alloys R c 40–65.<br />
YG-1 Tool Co.<br />
Ph: 847-634-3700<br />
Web site: yg1usa.com<br />
Workholding<br />
Innovations<br />
Versatile Lock<br />
3400V ultra-precise<br />
4" (101.6-mm) vise<br />
with 6" (152.4-mm)<br />
jaw opening has 0.0005" (0.013 mm) clamping repeatability<br />
with an enlarged workholding area. Anglock design prevents<br />
parts from lifting upward under heavy clamping loads. The<br />
pull-type HD690 vise with 9" (229-mm) opening is available<br />
with hydraulic actuation. Automation solutions feature integration<br />
<strong>of</strong> gaging, custom workholding, and Fanuc robotic systems.<br />
PinLock locating and mounting system makes attaching<br />
98 <strong>Manufacturing</strong>EngineeringMedia.com | August 2012<br />
and removing fixtures, vise/subplates from machining centers<br />
quick and easy with ±0.0005" (0.013 mm) repeatability. Also<br />
available are 5000-psi (345-bar) air hydraulic pump, swing<br />
clamps, and sine parallels <strong>for</strong> angled setups.<br />
Kurt <strong>Manufacturing</strong> Co.<br />
Ph: 877-226-7823<br />
Web site: www.kurtworkholding.com<br />
Tooling, Accessory Products<br />
Kaiser Series 310 EWD precision-finish<br />
digital boring head features absolute<br />
setting accuracy shown<br />
on a digital display and is<br />
capable <strong>of</strong> showing precise<br />
linear movement <strong>of</strong> the<br />
tool carrier in both directions<br />
during adjustments <strong>of</strong> a 0.00005"<br />
(0.0013-mm) diameter. Series 319<br />
SW rough boring system is available <strong>for</strong><br />
chamfering and back boring purposes<br />
covering the diameter range <strong>of</strong><br />
1.299–8.268" (33–210 mm). Also new<br />
from BIG Daishowa is the R-Cutter, an<br />
ultra-high-feed front and back radius<br />
chamfering mill, <strong>of</strong>fered in single-insert<br />
and a four-insert design <strong>for</strong> higher feed<br />
rates. The ATC alignment tool prevents<br />
misalignment <strong>of</strong> the machine tool<br />
spindle and the ATC gripper that may<br />
damage the spindle taper.<br />
BIG Kaiser Precision Tools Inc.<br />
Ph: 847-228-7660<br />
Web site: www.bigkaiser.com<br />
Slim Toolholding System<br />
The slim-nose powRgrip 6 toolholder,<br />
or PG6, has a minimal outside diameter<br />
<strong>of</strong> 0.4” (10 mm), as well as<br />
a clamping diameter ranging from<br />
0.008 to 0.125" (0.2–3.175 mm).<br />
Because <strong>of</strong> its small, slim design, the<br />
PG6 provides less tool interference,<br />
easily machines<br />
tight<br />
pockets,<br />
and