Puritan Bennett™ 840 Ventilator User's Pocket Guide - Covidien

12
PaTienT seTUP
Once you turn on the ventilator or run SST, the ventilator
runs POST, then displays the Ventilator Startup screen
(see Figure 7) on the lower screen.
noTe:
If TC was used on the previous patient setup, a note
emphasizing tube type and tube I.D. appears below the
SAME PATIENT button explanation.
fiGUre 7.
Ventilator startup screen
➪ Touch SAME PATIENT, then press ACCEPT to
continue ventilating with the most recent settings.
Ventilation does not begin until a patient is connected.
➪ Touch NEW PATIENT to begin ventilating with
new settings.
Puritan Bennett 840 Ventilator Pocket Guide