opel-vauxhall

Model: Astra-F 1,812,O 16V VectralCavalier 2,O 16V
Omega-B 2,O 16V Calibra 2,O 16V
Year: 1993-98
Engine code: C18XE, CISXEL, X2OXEV
OPEL-VAUXHALL I
System: Simtec 56.0156.1156.5
I Engine management 1
General information
Refer to the front of this manual for general test conditions,
terminology, detailed descriptions of wiring faults and a
general trouble shooter for electrical and mechanical faults.
0 Trouble codes are displayed by the malfunction indicator
lamp (MIL).
The ECM fault memory can also be checked using diagnostic
equipment connected to the data link connector (DLC).
Accessing
Ensure ignition switched OFF.
Bridge data link connector (DLC) terminals A and B
- 10-pin.
Bridge data link connector (DLC) terminals 6 and earth
- 16-pin.
Switch ignition ON.
Trouble codes will be displayed after a short flash H [A] and
a long pause [Bl.
/Autodata I Eng~ne
Count MIL flashes. Note trouble codes. Compare with
trouble code table.
Each trouble code consists of two groups of one or more
flashes.
The first group of flashes indicate the 'tens' of the trouble
code H [Cl.
The second group of flashes indicate the 'units' of the
trouble code H [Dl.
A short pause separates each trouble code group H [El.
A long pause separates each trouble code H [Fl.
For example: Trouble code 12 displayed a.
Each trouble code including 12 displayed three times.
4
management 687