04.03.2013 Views

service manual dvd recorder drx-2

service manual dvd recorder drx-2

service manual dvd recorder drx-2

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DRX-2<br />

18<br />

DRX-2<br />

Nucleus Name DS_CHR_TestImageOff<br />

Nucleus Number 102<br />

Description Switches the test-image off.<br />

Technical - Stop the DENC module.<br />

Execution Time Less than 1 second.<br />

User Input None<br />

Error Number Description<br />

Example 10200 Stopping the test image generation succeeded<br />

10201 The Chrysalis DENC-module failed.<br />

DS:> 102<br />

010200:<br />

Test OK @<br />

Nucleus Name DS_CHR_SineOn<br />

Nucleus Number 103<br />

Description Generate an audio sine signal on the audio output of the digital board.<br />

Note: Left channel 6kHz, right channel 12 kHz sine. Make sure to route the signal first.<br />

Technical - De-mute the analog board<br />

- Set fifo parameters for audio<br />

- Set the volume<br />

- Set the I2S outputs and configuration paths<br />

- Set the decoder mode<br />

- Configure the DUET DSP<br />

- Configure the PALM DSP<br />

- Put the AC3 audio in the fifo<br />

- Send ‘prepare’ command to the audio decoder<br />

- Send ‘play’ command to the audio decoder<br />

Execution Time Less than 1 second<br />

User Input None<br />

Error Number Description<br />

10300 The sine signal was successfully generated<br />

10301 The analog board could not be de-muted<br />

10302 The audio decoder did not initialise<br />

10303 The dsp2 of the audio decoder did not configure<br />

10304 The dsp1 of the audio decoder did not configure<br />

10305 There was a delay-error before starting<br />

10306 Wrong input was given to the decoder function<br />

Example DS:> 103<br />

010300:<br />

Test OK @<br />

Nucleus Name DS_CHR_SineOff<br />

Nucleus Number 104<br />

Description Stop generating the audio sine signal<br />

Technical - Reset the audio block of the Chrysalis<br />

Execution Time Less than 1 second.<br />

User Input None<br />

Error Number Description<br />

10400 Switching off the audio sine signal succeeded<br />

Example DS:> 104<br />

010400:<br />

Test OK @

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!