You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRX-2<br />
34<br />
DRX-2<br />
Progressive Scan (PSCAN)<br />
Nucleus Name DS_PSCAN_CommunicationDenc<br />
Nucleus Number 801<br />
Description Check the communication between the IIC controller of the chrysalis and the progressive<br />
scan DENC-IC<br />
Technical - IInitialise IIC<br />
- IWrite data to a register of the DENC through IIC<br />
Execution Time Less than 1 second<br />
User Input None<br />
Error Number Description<br />
80100 Communicating with the progressive scan DENC-IC succeed-ed<br />
80101 The IIC bus was not accessible<br />
80102 There was a timeout reading the device<br />
80103 The IIC acknowledge was not received<br />
80104 Communicating with the progressive scan DENC-IC failed<br />
80105 The initialisation of the IIC bus failed<br />
80106 The read data is not the same as the written data<br />
80107 No chip was expected<br />
Example DS:> 801<br />
080100:<br />
Test OK @<br />
Nucleus Name DS_PSCAN_TestImageOn<br />
Nucleus Number 802<br />
Description Generate the test images that are present on the progressive scan IC.<br />
Technical - See whether the user wanted a HATCH or a FRAME image pattern<br />
- Initialise the PIO pins of the chrysalis<br />
- Initialise IIC<br />
- Reset the DENC<br />
- Enable the 27Mhz clock<br />
- Send all settings for the pattern to the DENC through IIC<br />
Execution Time Less than 1 second<br />
User Input In case of ADV7196:<br />
When no input is given “HATCH” is the default<br />
- “HATCH”<br />
- “FRAME”<br />
Remark:<br />
“HATCH” is a crosshatch test pattern (horizontal and vertical white lines are displayed against<br />
a black background)<br />
“FRAME” is a uniform coloured frame/field test pattern (default white).<br />
In case of FLI2300: Nothing.<br />
Error Number Description<br />
80200 The generation of the test image succeeded<br />
80201 Unable to initialise pscan ic<br />
80202 Unable to reset DENC<br />
80203 Unable to generate image<br />
80204 No chip was expected<br />
Example DS:> 802 HATCH<br />
080200:<br />
Test OK @