You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRX-2<br />
36<br />
DRX-2<br />
Nucleus Name DS_PSCAN_TestImageColourSettingsGet<br />
Nucleus Number 805<br />
Description Get the colour settings of the hatch- or the frame- field.<br />
Technical - Initialise IIC.<br />
- Read the colour settings from the DENC through IIC.<br />
Execution Time Less than 1 second.<br />
User Input None<br />
Error Number Description<br />
80500 Getting the colour-settings succeeded<br />
80501 The progressive scan DENC-IC was not accessible through IIC<br />
80502 Unable to get colour<br />
80503 No chip was expected<br />
Example DS:> 805<br />
080500: Colour Y Cr Cb values: 0xD2 0x92 0x10<br />
Test OK @<br />
Nucleus Name DS_PSCAN_Routing<br />
Nucleus Number 806<br />
Description Route a video signal from the host processor through the progressive scan ICs to the pro<br />
gressive scan output of the set.<br />
Note: to route the progressive scan to the output of the set, first call nucleus 1112 with pa<br />
rameter 0 (video routing on analog board).<br />
Technical - Initialise the PIO pins of the chrysalis<br />
- Initialise IIC<br />
- Reset the DENC<br />
- Enable the 27Mhz clock<br />
- Send all settings to the DENC through IIC.<br />
Execution Time Less than 1 second.<br />
User Input None<br />
Error Number Description<br />
80600 Routing path is created successfully.<br />
80601 Unable to initialise the Chrysalis.<br />
80602 Unable to access DENC<br />
80603 Unable to access deinterlacer.<br />
80604 Wrong chips were expected.<br />
Example DS:> 806<br />
080600:<br />
Test OK @
Change language