User Guide - NetObjects Fusion

Examples
550
Examples
Creating a Button Rollover
You can use the Set Image and Use Image actions to give three-dimensional feel to
a button, for example, by highlighting it when the site visitor’s pointer passes over
it, by making it appear pushed in when pressed, and so on.
For this example, you need three pictures of a button—one showing how it looks
when the page loads, one showing it highlighted, and one showing it pressed.
Note: This example applies to images of buttons, but not to form
buttons. The Set Image action is not available for form buttons.
1. In Page view, place the picture of the button as it looks when the page loads.
2. To add an action to the button, click the Action tab on the Picture Properties
panel, and click the plus (+) button. The Set Action dialog appears.
3. In the When field, from the Page drop-down menu choose Page Loaded. Click
the Target Menu button next to the Target field and, from the Object Tree
dialog that appears, select the button object. In the Message field, from the
Object drop-down menu choose Set Image.
4. From the Parameters drop-down menu, choose Values.
The Parameters dialog appears.
Highlighted button
Button’s look when the page loads