User Guide - NetObjects Fusion

Chapter 28 Using NetObjects Fusion Components
For example, you can apply a rule for a text box so that the site visitor is required to
enter text before submitting the form. If the site visitor leaves the text field blank
and submits the form, the form will refresh with error markers, and the visitor will
not be able to submit the form until all fields with errors are completed correctly.
1. In the Signup dialog, click the label for the form element to which you want to
apply validation options.
2. Click the Error events tab.
Error events tab
3. Select a validation requirement from the Error event drop-down list.
Available error events will vary depending on the type of form object to which
the error event is being applied.
4. Click the Active check box so that the error event will be activated on the form.
You can also suspend validation requirements for the form element by clearing
the Active check box.
5. Edit the default error message text by replacing the default text in the Message
field.
Error messages for each form element that did not meet validation requirements
will appear below the form.
6. To apply a custom CSS style to the form object, type the name of the CSS style
in the text box or select the style from the drop-down list.
703