User Guide - NetObjects Fusion

Using the Flash Components
570
Different properties change the way the component can appear. It takes three
seconds for these changes to be applied to the component, but you can also see the
changed properties if you right-click the component, and then click Play.
To modify the component’s properties:
1. In Page View, click the Flash component.
2. Open the Properties panel, if it is not already open.
When the Flash component is selected, the Properties panel displays the Flash
Component’s properties.
Use the Properties panel to modify the component’s attributes, such as:
• The arrow’s color: Choose the color of the arrow.
• Background color: Choose the color on which the arrow is placed.
• If you want some other colors press on the More Colors… button and manage
the Color Picker. You should make sure the initial background color is
something other than the arrow color.
• Rotation: Choose a rotation angle. You must set a rotation value between 0 and
360. The value you select 360. The value you select depends on you on how
much you want to incline the arrow.
• Opacity: Choose the level of opacity for the component. The default is 1.00.
The Opacity property enables you to specify a level of transparency for the form