User Guide - NetObjects Fusion

Working with Toolbars
946
Note: NetObjects Fusion built-in toolbars cannot be deleted.
When necessary, you can reset the content of a built-in toolbar to its default
settings. To do that:
1. Select the built-in toolbar. The Reset button will appear.
2. Click Reset.
The default buttons will be restored to the toolbar.
Note: ‘Reset to default settings’ is an operation that can be performed
only on built-in toolbars.
Adding Commands to Toolbars
The new and dynamic system of toolbar customization within NetObjects Fusion
10 offers you the possibility to change the toolbars content by adding or removing
commands that you choose from all the existing commands in the program. In this
way, you can add commands to built-in and custom toolbars, move commands from
one toolbar to another, or change the position of commands on toolbars.
Note: The Standard Tools toolbar does not allow adding or removing
commands from it.
You can add commands to a toolbar by selecting a category from the Customize
dialog and dragging the command onto the toolbar. Here is an example:
To add a command to a toolbar:
1. Using the mouse, right-click on an existing toolbar and select the Customize
option.
The Customize dialog box will appear.
2. Click on the Commands tab.
3. Under Categories, click on Edit.
4. A list of commands will appear in the list box under Commands. Scroll down
and locate the command you want.