Indy R1000 Datasheet - Impinj

Indy R1000 ® Electrical, Mechanical, & Thermal Specification
Addr. Name R/W Bit Description Reset Type Comment
W 2
109 AUTO_READ R/W 12
10A DIS_T2R R/W 1
1
0
11
10
9
8
7
6
5
4
3
2
1
0
0
Enable manual override
Override value
Not used
Auto-read of pream_mag
Auto-read of rcorr_mag
Auto-read WB
rssi_rt_values
Auto-read NB
rssi_rt_values
Auto-read of tx_dac_q
Auto-read of tx_dac_i
Auto-read of rx_dec_q
Auto-read of rx_dec_i
Auto-read of rx_filt_q
Auto-read of rx_filt_i
Auto-read of rx_ph
Auto-read of ISR
Auto-read of RX FIFO
Disable T2R_D2
Disable T2R_D1
38 Revision 2.3, Copyright © 2012, Impinj, Inc.
h0000
h0000
10B SEED_HIGH R/W 15:0 LFSR seed high word hA5A5
10C SEED_LOW R/W 15:0 LFSR seed low word h5A5A
10D AUX_ADC_DATA R 7:0 AUX ADC Data h0000
For overriding the lock detect
signal from the FSM.
Serial interface control.
Settings 7 and 8 are sampled at
4x the GEN_RATE specified in
register h0C9
h0000 Serial interface control for
disabling channels.
Observe that T2R_D2 must not
be enabled when T2R_D1 is
disabled.
10E CLKOUT_CTRL R/W 2:0 Clock output setting h0005 The clock output setting is
decoded as follows:
0 = 48 MHz
1 = 24 MHz
2 = 12 MHz
3 = 6 MHz
4 = 3 MHz
5 = 1.5 MHz (default)
6 = Constant low output
7 = Constant high output