Batten luminaires - Pracht

Luminaire Troja LED
– equipped with lenses for different beam
angles as well as
– RGB version with controller upon request.
*
*pending
10
Also suited for emergency lighting
with OSRAM OT 20/230–240/24
with OSRAM OT 75/230–240/24
Housing: Low-profile, rugged extruded aluminium profile, vandalism protected,
integrate cable channel on the wall/ceiling side.
Cover: Made of polycarbonate (PC, impact-resistant), interior ribbing, supported
by an aluminium frame profile and die cast aluminium end caps, white, powder
coated, with hexagon or safety closure screws.
Seals: Circular silicone seal.
Electrical components: High-performance LEDs, converter; through-wiring max. 7 x 2.5 mm 2 .
Installation: Can be mounted by a single fitter, with variable mounting points
due to the Pracht Clip System. After mounting of the cover, the mounting clips
are protected against unauthorised access.
Type LED arrangement Watt No. of LEDs Art.-No. L Weight
(mm) (kg)
Vandalism protected surface mounted luminaire Troja, without through-wiring, with clear, impact-resistant PC cover, interior ribbing, with LEDs
PAV 7000/ 5 single row 12.5 5 76·1 213 439±2
PAV 7000/10 single row 25 10 76·1 225 705±2
PAV 7000/15 single row 37.5 15 76·1 238 900±2
PAV 7000/20 single row 50 20 76·1 250 1150±2
PAV 7000/25 single row 62.5 25 76·1 263 1615±2
PAV 7000/30 double row 75 30 76·1 275 1315±2
Further versions: Double or triple row LED arrangements as well as other lengths are available upon request.
Further versions: External converter arrangement depending on requirements.
Note when ordering through-wiring:
Please complete the 3. digit „·“ of the Art.-No. as follows: Digit Extra cost
Without through wiring 0
Through-wiring 2 x 1.5 mm 2 1
Through-wiring 2 x 2.5 mm 2 2
Through-wiring 3 x 1.5 mm 2 3
Through-wiring 3 x 2.5 mm 2 4
Through-wiring 4 x 1.5 mm 2 5
Through-wiring 4 x 2.5 mm 2 6
Through-wiring 5 x 1.5 mm 2 7
Through-wiring 5 x 2.5 mm 2 8
Through-wiring 5 x 1.5 mm 2 + 2 x 1.5 mm 2 9
Note: Other wattages and LED colors available upon request, for example, OSRAM POWER Flex ® .
Note: Basic colour is white RAL 9010. Graffiti Protect System upon request.
Note: Luminaire can be mounted on services trunking.
70±1
Variable mounting points
Areas of application: Accented illumination, architectural lighting solutions and illumination of small rooms.
L
– IMMEDIATELY high luminous intensity
– Low energy requirements
– High CO 2 reduction
– Long LED service life
– Insensitive to the vibrations
– High protection class
– Protected LED, directed light
Luminaire Troja LED with additional coloured accented illumination. Vandalism protected cover with stainless steel retaining strap.
Kabelführungskanal
Cable channel
260±2
99
Batten luminaires
01with
reflectors
Tubular
luminaires
02
Basic Line
03
LED
04