Batten luminaires - Pracht

Batten luminaires
01with
reflectors
02
Tubular
luminaires
03
Basic Line
Protection Class I acc. to EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
Luminaire Luna N, twin-lamp version.
86
11
Luminaire
Luna N T5/T8
for LL T5/16 mm and T8/26mm
single- and twin-lamp
Housing: Polyester, grey, fiberglass-reinforced.
Socket: Thermoplastic PC.
Lamp cover: Diffuser made of acrylic glass or polycarbonate (PC, impact-resistant),
internal prisms, clip made of stainless steel.
Seals: Age-resistant seals.
Electrical components: Low loss ballast B2 starter; electronic ballast.
Installation: Two mounting points with rubber seals. Suited for ceiling and
pendant mounting. Horizontal wall mounting under roofs.
Type Watt Inductive Electronic ballast L Weight
Art.-No. Art.-No. (mm) (kg)
Individual luminaire T8 with injection moulded PMMA Prachtmatic interior prism diffuser, stainless steel clip, without through-wiring, SK I
PPW 5700/1 1 x 18 1252 100 1252 103 668±2 1.8
PPW 5700/3 1 x 36 1252 230 1252 233 1278±2 2.2
PPW 5700/5 1 x 58 1252 360 1252 363 1578±2 2.6
PPW 5700/2 2 x 18 1252 130 1252 133 668±2 4.2
PPW 5700/4 2 x 36 1252 260 1252 263 1278±2 3.4
PPW 5700/6 2 x 58 1252 400 1252 403 1578±2 5.4
Individual luminaire T8 with injection moulded, impact-resistant PC Prachtmatic interior prism diffuser, stainless steel clip, without through-wiring, SK I
PPW 5700/1 PC 1 x 18 1252 110 1252 113 668±2 1.8
PPW 5700/3 PC 1 x 36 1252 240 1252 243 1278±2 2.2
PPW 5700/5 PC 1 x 58 1252 370 1252 373 1578±2 2.6
PPW 5700/2 PC 2 x 18 1252 140 1252 143 668±2 4.2
PPW 5700/4 PC 2 x 36 1252 270 1252 273 1278±2 3.4
PPW 5700/6 PC 2 x 58 1252 410 1252 413 1578±2 5.4
Individual luminaire T5 with injection moulded Prachtmatic interior prism PMMA diffuser, stainless steel clip, without through-wiring, SK I with multi-watt electronic ballast
PPW E 5700/25-45 1 x 28/54 5252 362 1278±2 2.2
PPW E 5700/27-29-47 1 x 35/49/80 5252 432 1578±2 2.6
PPW E 5700/28-48 2 x 35/49 5252 462 1578±2 4.8
Individual luminaire T5 w. injection moulded, impact-resistant Prachtmatic interior prism PC diffuser, stainless steel clip, without through-wiring, SK I w. multi-watt el. ballast
PPW E 5700/25-45 PC 1 x 28/54 5252 372 1278±2 2.2
PPW E 5700/27-29-47 PC 1 x 35/49/80 5252 442 1578±2 2.6
PPW E 5700/28-48 PC 2 x 35/49 5252 472 1578±2 4.8
Separately enclosed wiring kit for through- 18 / 14/24 604 518
wiring 5 x 1.5 mm 2 (10 A), silicone 36 / 28/54 604 536
58 / 35/49/80 604 558
Separately enclosed wiring kit for through- 18 / 14/24 604 528
wiring 5 x 2.5 mm 2 (16 A), silicone 36 / 28/54 604 546
58 / 35/49/80 604 568
Note: Other electronic ballasts upon request!
Areas of Application: Economical lighting for structures, not suited for unprotected outdoor areas.
Caution: When your planning involves
critical areas of application in the chemical
industry or in agriculture (electro-plating,
stabling etc.), for example, please consult
our experts first!
Note:
Please note the following quantities when
ordering replacement clips:
18 Watt = 6 pcs. / luminaire
36 Watt = 8 pcs. / luminaire
58 Watt = 10 pcs. / luminaire
Art.-No.: 604 212