Batten luminaires - Pracht

Batten luminaire
System Ariane T8
for FL T8/26 mm
single- and twin-lamp
with threaded ring lampholder
*
10
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
Housing: Polycarbonate, white, 100% recyclable, 2 connection
covers for continuous mounting.
Socket end pieces: One-piece socket end pieces made of PBTP.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Batten luminaire, can be supplemented with accessories
Seals: Short, age-resistant silicone seals.
Electrical components: Electronic ballast; through-wiring max. 7 x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless
steel. Suitable for ceiling, pendant and horizontal wall mounting.
131±2
58
±1
Variable Befestigungslochabstand
mounting points
variabel
58
±1
L 216±2
Type (VDE designation) Watt Electronic ballast L Weight
Art.-No. (mm) (kg)
Luminaire for individual and continuous mounting, with two connection covers and through-wiring 2 x 1.5 mm 2
PPCR 212/1 1 x 18 167 103 632±2 1.6
PPCR 212/3 1 x 36 167 233 1242±2 2.1
PPCR 212/5 1 x 58 167 363 1542±2 3.4
PPCR 212/2 2 x 18 167 133 632±2 2.5
PPCR 212/4 2 x 36 167 263 1242±2 3.6
PPCR 212/6 2 x 58 167 403 1542±2 4.6
Luminaire for continuous mounting, with two connection covers and through-wiring 4 x 1.5 mm 2
PPCR 214/1 1 x 18 169 103 632±2 1.6
PPCR 214/3 1 x 36 169 233 1242±2 2.1
PPCR 214/5 1 x 58 169 363 1542±2 3.4
PPCR 214/2 2 x 18 169 133 632±2 2.5
PPCR 214/4 2 x 36 169 263 1242±2 3.6
PPCR 214/6 2 x 58 169 403 1542±2 4.6
Extra cost:
El. bal. Dim 1–10V (add to electronic ballast version) 685 004
El. bal. Dim Dali (add to electronic ballast version) 685 005
El. bal. Industry (add to electronic ballast version) 36/58 685 006
Non-silicone design 685 009
Cable entry at the side 691 150
Cable entry at the ceiling side 691 151
Conductor cross-section 1.5 mm 2 = 10 A
Conductor cross-section 2.5 mm 2 = 16 A
Note: For accessories, see page 56!
PC
Areas of application: Mine shaft lighting, production plants, greenhouses, façade lighting (built-in).
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
Version with parabolic mirror reflector and internal ring louvers. One-piece, twin-lamp T8/26 mm threaded ring lampholder with PSR.
91±2
55
Batten luminaires
01with
reflectors