Batten luminaires - Pracht

Batten luminaires
01with
reflectors
02
Tubular
luminaires
03
Basic Line
04
LED
05
Vandalism
06
Special
luminaires
Push-fit lampholder with thumb screw
for easier maintenance (lamp replacement).
126
❄ ❄❄❄❄
10
❄
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
Cold storage luminaire
Arktis T8 down to –50°C
for FL T8/26 mm
single- and twin-lamp
Utmost energy efficiency owing to
modern pralux ® engineering!
173±2
Housing: Seamless luminaire housing made of white, fiberglassreinforced
polyester, essentially fully resistant against acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end made of PBT.
Socket: Two-slot plug-in socket with silver-plated contacts.
Lamp cover: Specular reflector, wide- or narrow-beam,
made of acrylic glass (PMMA), resistant to cold, Pracht TRIO Cold System.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 5 x 2.5 mm 2 contact aid and auxiliary ignition aid.
Installation: Variable mounting points using the Pracht Clip System made of
stainless steel. Suited for ceiling, pendant and horizontal wall mounting.
77±1
40°
135±1
Befestigungslochabstand
Variable mounting variabel points
Twin-lamp, one-piece, stable push-fit lampholder.
173±2
77±1
L 280±2
Type (VDE-designation) Watt Inductive max. –50°C Compens. max. –40°C EVG max. –30°C L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Deep-freeze storage luminaires for individual and continuous mounting, T amb = -50º C, through-wiring 3 x 1.5 mm 2 230 V 50 Hz, with adjustable specular reflector made of
clear acrylic glass, wide-beam, with centering and retaining springs, with push-fit lampholders, designed to be extremely resistant to cold, Pracht Cold Contact System
PTK DD 913/1 HLR-PLEX-BREIT-KK pralux ® 1 x 18 1460 100 1460 101 1460 103 636±2 4.1
PTK DD 913/3 HLR-PLEX-BREIT-KK pralux ® 1 x 36 1460 230 1460 231 1460 233 1246±2 4.7
PTK DD 913/4 HLR-PLEX-BREIT-KK pralux ® 2 x 36 1460 260 1460 261 1460 263 1246±2 7.7
PTK DD 913/5 HLR-PLEX-BREIT-KK pralux ® 1 x 58 1460 360 1460 361 1460 363 1546±2 6.1
PTK DD 913/6 HLR-PLEX-BREIT-KK pralux ® 2 x 58 1460 400 1460 401 1460 403 1546±2 10.3
Replacement parts: Specular reflector, wide-beam, with stainless steel centering and retaining springs, Pracht TRIO Cold System
HLR-PLEX-BREIT-KK-DD pralux ® 18 617 251
HLR-PLEX-BREIT-KK-DD pralux ® 36 617 253
HLR-PLEX-BREIT-KK-DD pralux ® 58 617 255
Deep-freeze storage luminaires for individual and continuous mounting, T amb = -50º C, through-wiring 3 x 1.5 mm 2 230 V 50 Hz, with adjustable specular reflector made of
clear acrylic glass, narrow-beam, with centering and retaining springs, with push-fit lampholders, designed to be extremely resistant to cold, Pracht Cold Contact System
PTK DD 913/1 HLR-PLEX-TIEF-KK pralux ® 1 x 18 1461 100 1461 101 1461 103 636±2 4.1
PTK DD 913/3 HLR-PLEX-TIEF-KK pralux ® 1 x 36 1461 230 1461 231 1461 233 1246±2 4.7
PTK DD 913/4 HLR-PLEX-TIEF-KK pralux ® 2 x 36 1461 260 1461 261 1461 263 1246±2 7.7
PTK DD 913/5 HLR-PLEX-TIEF-KK pralux ® 1 x 58 1461 360 1461 361 1461 363 1546±2 6.1
PTK DD 913/6 HLR-PLEX-TIEF-KK pralux ® 2 x 58 1461 400 1461 401 1461 403 1546±2 10.3
Replacement parts: Specular reflector, narrow-beam, with stainless steel centering and retaining springs, Pracht TRIO Cold System
HLR-PLEX-TIEF-KK-DD pralux ® 18 616 251
HLR-PLEX-TIEF-KK-DD pralux ® 36 616 253
HLR-PLEX-TIEF-KK-DD pralux ® 58 616 255
Through-wiring 5 x 1.5 mm 2 36 690 316
Built-in cold-resistant through-wiring 58 690 518
Thumb screw for push-fit lampholder KNS 699 444
❄ ❄❄❄❄
Areas of application: Cold storage and deep-freezing facilities, pre-cooling rooms, shock frosting rooms.