Batten luminaires - Pracht

System Luminaire
Rimberg T5
for FL T5/16 mm
with push-fit lampholders,
single- and twin-lamp
*
Protection Class II according to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
230V/50 Hz
Caution! Note burn-in recommendations
issued by
the lamp manufacturer!
Housing: Slim, elegant, fully sealed luminaire housing made of white, fibreglassreinforced
polyester, essentially fully resistant against acids and alkalis.
Socket end pieces: Single-part press-fit socket end pieces made of PBTP.
Socket: Two-slot plug-in socket.
Lamp cover: Elegant, clear cover made of impact-resistant PC, with internal prisms,
with stainless steel clip.
Seals: Short, age-resistant silicone seals.
Electrical components: Electronic ballast; industry electronic ballast (extra cost)
through-wiring to max. 7x 2.5 mm 2 .
Installation: Variable mounting points with Pracht Clip System made of stainless
steel. Suitable for ceiling, pendant and horizontal wall mounting.
Type (VDE designation) Watt High efficiency (HE) EBal. Watt High output (HO) EBal. L Weight
Art.-No. Art.-No. (mm) (kg)
Luminaire RIMBERG T5, FL cover made of impact-resistant polycarbonate (PC), clear with internal prisms, through-wiring 2 x 1.5 mm 2
PPR DD T5 212/.. / VKR-MAK-IG 1x 14 5401 103 1x24 5401 513 597±2 2.2
PPR DD T5 212/.. / VKR-MAK-IG 1x 21 5401 233 1x39 5401 743 897±2 2.8
PPR DD T5 212/.. / VKR-MAK-IG 1x 28 5401 363 1x54 5401 873 1197±2 3.3
PPR DD T5 212/.. / VKR-MAK-IG 1x 35 5401 433 1x49 5401 923 1497±2 3.9
PPR DD T5 212/.. / VKR-MAK-IG 1x80 5401 973 1497±2 3.9
PPR DD T5 212/.. / VKR-MAK-IG 2 x 14 5401 133 2x24 5401 533 597±2 2.5
PPR DD T5 212/.. / VKR-MAK-IG 2 x 21 5401 263 2x39 5401 763 897±2 3.2
PPR DD T5 212/.. / VKR-MAK-IG 2 x 28 5401 403 2x54 5401 893 1197±2 3.6
PPR DD T5 212/.. / VKR-MAK-IG 2 x 35 5401 463 2x49 5401 943 1497±2 4.9
PPR DD T5 212/.. / VKR-MAK-IG 2x80 5401 993 1497±2 4.9
Extra cost:
Electronic ballast Dim 1–10V 685 004
Electronic ballast Dim Dali 685 005
Electronic ballast Industry 49/54/80 685 006
Non-silicone design 685 009
Maintenance-friendly connection compartment owing to XXL cover L = 360 mm.
Additional item: XXL cover: 692 210, extra cost, not possible with 14/24 W.
10
126±2
60
Variable
Befestigungslochabstand
mounting points
variabel
Extra cost for through-wiring 14/24 Watt 21/39 Watt 28/54 Watt 35/49/80 Watt
Art.-No. Art.-No. Art.-No. Art.-No.
Through-wiring 4 x 1.5 mm 2 = 10A 691 114 691 214 691 314 691 514
Through-wiring 4 x 2.5 mm 2 = 16A 691 124 691 224 691 324 691 524
Areas of application: Parking garages, ramp illumination, public tansport areas, swimming pools, stadiums, awnings.
Captive press-fit cover, super fast maintenance
owing to stainless steel press-fit cover clips.
L
*For versions with electronic ballast:
Identification
Luminaires must be operated
with covers in place!
126±2
60
220±2
65
Batten luminaires
01with
reflectors