Batten luminaires - Pracht

01
Batten luminaires
with reflectors
02
Tubular
luminaires
03
Basic Line
04
LED
05
Vandalism
06
Special Special
luminaires luminaires
07
Industrial
luminaires
08
Surface and recessed
luminaires
Listed with the
Deutsche Bahn AG
Protection class II acc. to VDE 0711/EN 60598
Ingress protection IP65
Dust-proof
Jet-proof
Shock (RC) 0.63*
230V/50 Hz
Easy mounting of cover and FL. Retaining strap: Aids first-time installation and
when changing lamps, not suited for continuous duty!
152
Utmost energy efficiency owing to
modern pralux ® engineering!
10
Recessed luminaire
Meißner T8
for FL T8/26 mm
for panelled or closed ceilings,
and lighting channel systems
Befestigungslochabstand
Variable mounting variabel points
Type (VDE designation) Watt Inductive Compensated Electronic ballast L Weight
Art.-No. Art.-No. Art.-No. (mm) (kg)
Surface mounted and recessed luminaire with through-wiring 2 x 1.5 mm 2 , for lengthways installation, one panel width Modul 100 …
… with lamp cover made of acrylic glass (PMMA), with centering and retaining springs and wide beam light distribution curve
PPR DD 112/1 LAB 085 PLEX 1 x 18 300 100 300 101 300 103 636±2 2.4 pralux ®
PPR DD 112/3 LAB 085 PLEX 1 x 36 300 230 300 231 300 233 1246±2 3.8 pralux ®
PPR DD 112/5 LAB 085 PLEX 1 x 58 300 360 300 361 300 363 1546±2 5.2 pralux ®
… with lamp cover made of polycarbonate (PC), with centering and retaining springs and wide beam light distribution curve
PPR DD 112/1 LAB 085 MAK 1 x 18 300 110 300 111 300 113 636±2 2.4 pralux ®
PPR DD 112/3 LAB 085 MAK 1 x 36 300 240 300 241 300 243 1246±2 3.8 pralux ®
PPR DD 112/5 LAB 085 MAK 1 x 58 300 370 300 371 300 373 1546±2 5.2 pralux ®
… with lamp cover made of acrylic glass (PMMA), with centering and retaining springs, interior cross blade louver and wide beam light distribution curve
PPR DD 112/1 LAB 085 PLEX-QLR 1 x 18 301 100 301 101 301 103 636±2 2.6 pralux ®
PPR DD 112/3 LAB 085 PLEX-QLR 1 x 36 301 230 301 231 301 233 1246±2 4.0 pralux ®
PPR DD 112/5 LAB 085 PLEX-QLR 1 x 58 301 360 301 361 301 363 1546±2 5.5 pralux ®
… with lamp cover made of polycarbonate (PC), with centering and retaining springs, interior cross blade louver and wide beam light distribution curve
PPR DD 112/1 LAB 085 MAK-QLR 1 x 18 301 110 301 111 301 113 636±2 2.6 pralux ®
PPR DD 112/3 LAB 085 MAK-QLR 1 x 36 301 240 301 241 301 243 1246±2 4.0 pralux ®
PPR DD 112/5 LAB 085 MAK-QLR 1 x 58 301 370 301 371 301 373 1546±2 5.5 pralux ®
Extra cost:
Electronic ballast Dim 1–10V (add to el. bal. version) 685 004
Electronic ballast Dim Dali (add to el. bal. version) 685 005
Electronic ballast Industry (add to el. bal. version) 36/58 685 006
Through-wiring 4 x 1.5 mm 2 , built-in 690 114
*Shock version 100 999
Housing: Polyester, white, fiberglass-reinf., essentially fully resistant to acids and alkalis.
Socket end pieces: One-piece push-fit lampholder end pieces made of PBT.
Socket: Press-fit cover (DD), Two-slot plug-in socket with silver-plated contacts,
Lamp cover: Width 85 mm, Modul 100, one panel width, wide beam, made of acrylic
glass (PMMA) or polycarbonate (PC, impact-resistant), prachtopal ® upon request, with
stainless steel centering and retaining springs.
Seals: Short, age-resistant silicone seals.
Electrical components: Low loss ballast B1 starter; electronic ballast;
through-wiring max. 7x 2.5 mm 2 .
Installation: Variable mounting points using the Pracht Clip System made of stainless steel.
Suited for ceiling and recessed mounting, pendant and horizontal wall mounting.
Note: Transverse installation, as well as other wattages and models available upon request.
For easier installation of our recessed luminaires we recommend using our recess frame, available as an accessory. See pages 176–177, replacement parts upon request!
Areas of application: Swimming pools, changing rooms, washrooms and shower rooms, transport services, canopies, kitchens and hospitals.
Captive cover plate 085 and push-fit cover.
L
154±2
77
±1
92±1
70