Flyer - Dlubal

Dlubal engineering software is a high performance
software ideally suited for structural design as well as
civil engineering
mechanical engineering
plant engineering
Our programs are not only highly versatile
but also a joy to use. This state-of-the-art
software provides you with a proven
engineering solution that will help
you succeed on the international
market.
Superior
User Interface
Powerful
Analysis Features
BIM – Integration
International
Support
As more and more of our customers wish to use the program
in different languages and with different national standards,
we are pleased to accomodate these requests. In its new program
versions, Dlubal Enginerering Software offers numerous standards,
like the Eurocodes with the National Annexes, and allows you to
use the program in the following languages:
French
The Intuitive
and Reliable
Design Software
for Structural
Engineers
This is a great opportunity if you always wanted to
carry out your projects using one of the new
languages throughout the workflow, from the
graphical user interface to the printout report, and
to exchange your data with partners around the
globe, thus saving time and reducing cost.
German English Italian Spanish Russian Czech Polish Portuguese
Our packages for Europe
RFEM EURO STEEL
Steel design package
(1)
RFEM EURO CONCRETE
Reinforced concrete construction
RX-TIMBER EUROCODE SUITE
Timber design package
RFEM RFEM RX-TIMBER Glued-Laminated Beam
RF-STEEL RF-CONCRETE RX-TIMBER Purlin
RF-STEEL EC3 RF-CONCRETE Columns RX-TIMBER Frame
RF-FRAME-JOINT Pro RF-PUNCH RX-TIMBER Brace
RF-HSS RF-CONCRETE NL RX-TIMBER Continuous Beam
RF-DSTV RF-CONCRETE Deflect RX-TIMBER Column
RF-FOUNDATION Pro
4,900 € 4,900 € 1,900 €
(1) © www.ibehlenz.de, (2) © www.josef-gartner.de, (3) © www.pirminjung.ch
Dlubal Engineering Software Structural Analysis and Design Software
(2)
(3)
Eurocode software packages www.dlubal.com

www.dlubal.com Eurocode software packages
2
RFEM
EURO STEEL
-
Steel Design
Package
The steel design package includes
RFEM (basic program)
RF-STEEL
RF-STEEL EC3
RF-FRAME-JOINT Pro
RF-HSS
RF-DSTV
These modules will allow
you to calculate your steel
design projects.
RFEM
RFEM is a 3D Finite Element Analysis
(FEA) program for
Plates
Shells
Frameworks
Due to the modular conception of the software,
a package can be assembled that is tailored to
individual demands.
RF-STEEL
RF-STEEL is one of the add-on modules integrated in
the RFEM user interface. The program is subdivided into
two parts:
RF-STEEL Surfaces performs the stress analysis and also
the serviceability limit state design for surfaces.
RF-STEEL Members designs member elements.
RF-STEEL carries out the general stress analysis by
calculating existing stresses and comparing them with
the limit stresses.
RF-STEEL EC3
RF-STEEL EC3 performs all typical ultimate limit state
designs, stability and deformation analyses, as well as
fire protection designs for structural steel according to
EN 1993-1-1:2005 + AC:2009
EN 1993-1-2:2006 + AC:2005
EN 1993-1-4:2006 (fire protection design)
EN 1993-1-5:2006
RF-FRAME-JOINT Pro
The RFEM add-on module RF-FRAME-JOINT Pro creates
and classifies bending-resistant, bolted connections
between columns and horizontal beams.
The rigid bolt connections are designed by the ultimate
load method according to Eurocode 3.
Dlubal Engineering Software Structural Analysis and Design Software
RF-HSS
RF-HSS represents the RFEM add-on module that
designs various new hollow section connections or
modifies the existing ones.
Planar and spatial truss nodes, which contain round,
square, or rectangular hollow sections, can be
designed. RF-HSS performs the ultimate limit state
design according to specifications given in
Eurocode 3 (EN 1993-1-8:2005).
RF-DSTV
The RFEM add-on module RF-DSTV (German Steel
Construction Association) designs moment resisting
and pinned I-beam connections for members according
to the German guideline „Typified Connections in Steel
Building Construction.“ The design capacities are
determined in accordance with the Standard:
EC 3

RFEM
EURO CONCRETE
-
Reinforced Concrete
Package
The reinforced concrete package
includes:
RFEM
RF-CONCRETE
RF-CONCRETE Columns
RF-PUNCH
RF-CONCRETE NL
RF-CONCRETE Deflect
RF-FOUNDATION Pro
RF-CONCRETE
The add-on module RF-CONCRETE is used for the
design of structural components made of reinforced
concrete. RF-CONCRETE performs the reinforced
concrete design of surfaces, members, and sets of
members for the ultimate and the serviceability limit
state according to
EN 1992-1-1:2004 + AC:2010
RF-CONCRETE Columns
The add-on module RF-CONCRETE Columns is a powerful
software tool of the RFEM program family used to design
reinforced concrete. Take advantage of RF-CONCRETE
Columns to perform the
ultimate limit state design
for rectangular or circular
compression elements
according to the model
column method (method
based on nominal
curvature).
RF-PUNCH
The RFEM add-on module RF-PUNCH is used for the
design of punching shear resistance for surfaces supported
by columns or nodal supports. The governing
punching load is automatically determined from the
specified load. However, it is also possible to apply
a concentrated punching load to a plate manually.
RF-PUNCH allows for a quick punching shear design
without entering a lot of data. The following Standard
is available:
EN 1992-1-1:2004 + AC:2010
(1) © www.ingena.info, (2) © www.agabau.at
(1)
RF-CONCRETE NL
The add-on module RF-CONCRETE NL is an extension
to the RF-CONCRETE program group. RF-CONCRETE NL
allows for a realistic calculation of deformations, stresses,
and crack widths of plates, walls, planar structures,
and shells made of reinforced concrete by taking into account
the nonlinear behavior of the composite material
when determining internal forces and deformations.
The nonlinear calculation is specified in the following
Standard:
EN 1992-1-1:2004 + AC:2010
RF-CONCRETE Deflect
This add-on module is used for deformation analysis of
shell structures taking into account the cracked state.
Creeping, shrinkage, and tension stiffening between the
cracks can be included in the deformation analysis.
RF-FOUNDATION Pro
The add-on module FOUNDATION Pro is used to design
single, bucket, and plate foundations for all support
forces of an RFEM model according to:
EN 1992-1-1
EN 1997-1
The following foundation
types are available:
Foundation plate
Bucket foundation
with smooth bucket
sides
Bucket foundation
with rough bucket
sides
Single foundation
with rough sides
Dlubal Engineering Software Structural Analysis and Design Software 3
(2)
www.dlubal.com Eurocode software packages

www.dlubal.com Eurocode software packages
4
RX-TIMBER
EUROCODE SUITE
-
Timber Design
Package
The timber design package includes:
RX-TIMBER Glued-Laminated Beam
RX-TIMBER Purlin
RX-TIMBER Frame
RX-TIMBER Brace
RX-TIMBER Continuous Beam
RX-TIMBER Column
RX-TIMBER Glued-Laminated Beam
The stand-alone module RX-TIMBER Glued-Laminated
Beam designs glued-laminated beams for the ultimate
and the serviceability limit state according to
EN 1995-1-1:2004-11 (EC5). In addition, the fire
protection design according to EN 1995-1-2 is available.
The following beam types can be designed:
Parallel beam
Monopitch roof beam
Double tapered beam
Curved beam
Pitched cambered beam with constant height
Pitched cambered beam with variable height
Fish beam - parabolic
Fish beam with roundings in central area
RX-TIMBER Purlin
The stand-alone module RX-TIMBER Purlin designs beams
for the ultimate and the serviceability limit states as well
as for fire protection according to EN 1995-1-1:2009 (EC5)
and DIN 1052:2008-12. RX-TIMBER Purlin determines the
coupling elements required in the coupling zone for:
Single-span beam with and without cantilever
Continuous beam with and without cantilever
Hinged girder system (Gerber) with and without
cantilever
RX-TIMBER Frame
RX-TIMBER Frame designs three-hinged frames with
finger joint connections.
RX-TIMBER Brace
The stand-alone program RX-TIMBER Brace performs
the ultimate and the serviceability limit state design
as well as the fire protection design for stiffening
bracings in accordance with the European Standard
EN 1995-1-1:2004-11 (EC 5).
(1) © www.ib-guter.de
The following roof structures can be designed:
Monopitch roof
Duopitch roof
Curved roof
Dlubal Engineering Software Structural Analysis and Design Software
RX-TIMBER Continuous Beam
The stand-alone module RX-TIMBER Continuous Beam
designs girders according to EN 1995-1-1:2004-11(EC5).
The ultimate and serviceability limit state design
is carried out as well as the fire protection design.
Design of the following geometric models:
Single-span girder with and without cantilevers
Continuous girder with and without cantilevers
Hinged girder system (Gerber) with and without
cantilevers
RX-TIMBER Column
The stand-alone module RX-TIMBER Column designs
rectangular and round timber columns according
to EN 1995-1-1:2004 (EC5).
Hinged columns, optionally with elastic restraint
of head or footing
Bracket, optionally with elastic restraint of footing
More
information:
Dlubal Engineering Software
Am Zellweg 2, D-93464 Tiefenbach
Tel.: +49 9673 9203-0
Fax: +49 9673 9203-51
www.dlubal.com
info@dlubal.com
(1)